Directional Cooling-Induced Fracturing: Directional Cooling Data Under True-Triaxial Stress State

Trzeciak, Maciej

doi:10.15121/1879654

Title: Directional Cooling-Induced Fracturing: Directional Cooling Data Under True-Triaxial Stress State

Dataset
Other Related Research

Abstract

Data includes Directional Cooling-Induced Fracturing (DCIF) testing data using westerly granite blocks. This submission includes data from two samples of westerly granite, lab sample 7 and 8. Files contain stress, temperature and acoustic emission data acquired during polyaxial, laboratory testing of westerly granite blocks for each sample. FILES: .tradb -- files containing acoustic emission waveforms; sqlite3 database .pridb -- files containing basic acoustic emission information (no waveforms); sqlite3 database .geom -- geometry of the AE sensor network (ASCII)

Authors:

University of Wisconsin-Madison

Publication Date:: Fri Jul 01 00:00:00 EDT 2022

Other Number(s):: 1398

DOE Contract Number:: EE0009033

Research Org.:: DOE Geothermal Data Repository; University of Wisconsin-Madison

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Renewable Power Office. Geothermal Technologies Program (EE-4G)

Collaborations:: University of Wisconsin-Madison

Subject:: 15 GEOTHERMAL ENERGY; AE; DCIF; Directional Cooling Induced Fracturing; acoustic emission; directional cooling; energy; failure; fracturing; geothermal; granite; rock; sample; stress; stress test; test; testing; triaxial; true-triaxial; westerly granite

OSTI Identifier:: 1879654

DOI:: https://doi.org/10.15121/1879654

Citation Formats


                    Trzeciak, Maciej. Directional Cooling-Induced Fracturing: Directional Cooling Data Under True-Triaxial Stress State.  United States: N. p., 2022. 
        Web.  doi:10.15121/1879654.

Copy to clipboard


                    Trzeciak, Maciej. Directional Cooling-Induced Fracturing: Directional Cooling Data Under True-Triaxial Stress State.  United States.  doi:https://doi.org/10.15121/1879654

Copy to clipboard


                    Trzeciak, Maciej. 2022.  
"Directional Cooling-Induced Fracturing: Directional Cooling Data Under True-Triaxial Stress State".  United States.  doi:https://doi.org/10.15121/1879654.  https://www.osti.gov/servlets/purl/1879654. Pub date:Fri Jul 01 00:00:00 EDT 2022

Copy to clipboard


                    
@article{osti_1879654,

  title        = {Directional Cooling-Induced Fracturing: Directional Cooling Data Under True-Triaxial Stress State},

  author       = {Trzeciak, Maciej},

  abstractNote = {Data includes Directional Cooling-Induced Fracturing (DCIF) testing data using westerly granite blocks. This submission includes data from two samples of westerly granite, lab sample 7 and 8. Files contain stress, temperature and acoustic emission data acquired during polyaxial, laboratory testing of westerly granite blocks for each sample. FILES: .tradb -- files containing acoustic emission waveforms; sqlite3 database .pridb -- files containing basic acoustic emission information (no waveforms); sqlite3 database .geom -- geometry of the AE sensor network (ASCII)},

  doi          = {10.15121/1879654},

  journal      = {},

  number       = ,

  volume       = ,

  place        = {United States},

  year         = {Fri Jul 01 00:00:00 EDT 2022},

  month        = {Fri Jul 01 00:00:00 EDT 2022}

}

Copy to clipboard

Dataset:

View Dataset

DOI: https://doi.org/10.15121/1879654

Save / Share:

Export Metadata

Save to My Library

Similar records in DOE Data Explorer and OSTI.GOV collections:

Directional Cooling-Induced Fracturing Westerly Granite Test Results

Dataset Nakagawa, Seiji

Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on a short, cylindrical sample of Westerly granite (diameter = 4 inches, height ~ 2 inches). Liquid nitrogen was poured in a copper cup attached to the top of the sample, and the resulting acoustic emissions (AEs) and temperature changes on the surface of the sample were monitored. The obtained AEs were used to determine the microcracking source locations and amplitude, and the associated moment tensors. Included in this submission is an animation of the AEs, a graphic displaying the temperature changes, and the measured data.
Raw neutron scattering data for strain measurement of hydraulically loaded granite and marble samples in triaxial stress state

Dataset Polsky, Yarom

This entry contains raw data files from experiments performed on the Vulcan beamline at the Spallation Neutron Source at Oak Ridge National Laboratory using a pressure cell. Cylindrical granite and marble samples were subjected to confining pressures of either 0 psi or approximately 2500 psi and internal pressures of either 0 psi, 1500 psi or 2500 psi through a blind axial hole at the center of one end of the sample. The sample diameters were 1.5" and the sample lengths were 6". The blind hole was 0.25" in diameter and 3" deep. One set of experiments measured strains at pointsmore »« less
DCIF (Directional Cooling-Induced Fracturing) Westerly Granite AE Borehole Damage Effect Test (Task 3-0)

Dataset Nakagawa, Seiji

Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on three rectangular Westerly granite blocks (width=depth=4.0", height=2.0") which were preheated to 200, 400, and 600 degree C to induce damage (microcracks) with varying degrees. Liquid nitrogen was poured in a small, 1"-diameter copper cup attached to the top of the sample, and the resulting acoustic emissions (AEs) and temperature changes on the surface of the sample were monitored. The experiments were conducted under one selected biaxial stress (5.8MPa). The obtained AEs were used to determine the microcracking source locations and amplitude, and the associated moment tensors. The onset time of the AEsmore »« less
Utah FORGE: Triaxial Direct Shear Results

Dataset Frash, Luke ; Lyare, Uwaila ; K C, Bijay ; ...

This submission contains a report and associated data from triaxial direct shear tests conducted by Los Alamos National Laboratory. The samples used were sourced from 16A(78)-32 well core. The primary objectives of this test were to determine the shear strength in both intact and residual states, evaluate dilation against displacement, assess permeability in relation to displacement, time, and normal stress, understand the relationship between aperture and normal stress, and monitor the effluent chemistry as a function of time.
Utah FORGE: Triaxial Direct Shear Results - February 2025

Dataset Frash, Luke ; K C, Bijay ; Iyare, Uwaila ; ...

This dataset contains results from nine triaxial direct shear tests conducted by Los Alamos National Laboratory on samples from FORGE Well 16A(78)-32. The primary objectives of this work were to determine the shear strength in both intact and residual states, evaluate dilation against displacement, assess permeability in relation to displacement, time, and normal stress, understand the relationship between aperture and normal stress, and monitor the effluent chemistry as a function of time. The data includes time-series measurements of stress, displacement, permeability, and effluent chemistry, with and without experimental dilution corrections. Additional materials include profilometry data, photographic documentation of the experimentalmore »« less

Similar Records