Utah FORGE Phase 3 Native State Model: 2022 Update

Podgorney, Rob; Liu, R.

doi:10.15121/1879437

Title: Utah FORGE Phase 3 Native State Model: 2022 Update

Dataset
Other Related Research

Abstract

This is the Phase 3 native state model update. The Phase 3 numerical model represents a significant subsurface volume below the FORGE site footprint. The model domain of 4.0 km x 4.0 km x 4.2 km is located approximately between depths of 4000 to 4200 meters below land surface. This data archive consists of 10 files, 4 of which are simulation input files and the remaining 6 are simulation output files. There is an included readme.txt file that contains details on each of the data files. The input files include meshes, FALCON code inputs, tabulated data of water properties, temperature values, and model boundaries. The output files include simulation outfiles and point data of modeled material properties.

Authors:

Podgorney, Rob; Liu, R.

Idaho National Laboratory

Publication Date:: Fri Jul 29 00:00:00 EDT 2022

Other Number(s):: 1397

DOE Contract Number:: EE0007080

Research Org.:: DOE Geothermal Data Repository; Idaho National Laboratory

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Renewable Power Office. Geothermal Technologies Program (EE-4G)

Collaborations:: Idaho National Laboratory

Subject:: 15 GEOTHERMAL ENERGY; 16A78-32; 56-32; 58-32; 78-32; 78B-32; Utah FORGE; energy; fractures; geothermal; input; input files; model; native state model; pore pressure; pressure; processed data; raw data; reservoir potential; simulation; stress; temperature; water

OSTI Identifier:: 1879437

DOI:: https://doi.org/10.15121/1879437

Citation Formats


                    Podgorney, Rob, and Liu, R. Utah FORGE Phase 3 Native State Model: 2022 Update.  United States: N. p., 2022. 
        Web.  doi:10.15121/1879437.

Copy to clipboard


                    Podgorney, Rob, & Liu, R. Utah FORGE Phase 3 Native State Model: 2022 Update.  United States.  doi:https://doi.org/10.15121/1879437

Copy to clipboard


                    Podgorney, Rob, and Liu, R. 2022.  
"Utah FORGE Phase 3 Native State Model: 2022 Update".  United States.  doi:https://doi.org/10.15121/1879437.  https://www.osti.gov/servlets/purl/1879437. Pub date:Fri Jul 29 00:00:00 EDT 2022

Copy to clipboard


                    
@article{osti_1879437,

  title        = {Utah FORGE Phase 3 Native State Model: 2022 Update},

  author       = {Podgorney, Rob and Liu, R.},

  abstractNote = {This is the Phase 3 native state model update. The Phase 3 numerical model represents a significant subsurface volume below the FORGE site footprint. The model domain of 4.0 km x 4.0 km x 4.2 km is located approximately between depths of 4000 to 4200 meters below land surface. This data archive consists of 10 files, 4 of which are simulation input files and the remaining 6 are simulation output files. There is an included readme.txt file that contains details on each of the data files. The input files include meshes, FALCON code inputs, tabulated data of water properties, temperature values, and model boundaries. The output files include simulation outfiles and point data of modeled material properties.},

  doi          = {10.15121/1879437},

  journal      = {},

  number       = ,

  volume       = ,

  place        = {United States},

  year         = {Fri Jul 29 00:00:00 EDT 2022},

  month        = {Fri Jul 29 00:00:00 EDT 2022}

}

Copy to clipboard

Dataset:

View Dataset

DOI: https://doi.org/10.15121/1879437

Save / Share:

Export Metadata

Save to My Library

Similar records in DOE Data Explorer and OSTI.GOV collections:

Utah FORGE Phase Native State FALCON Model Files

Dataset Podgorney, Robert K

The submission includes FALCON input file and mesh for the an initial pressure-temperature simulation, and a second set for pressure-temperature-displacement simulation. All simulations are steady state. Data and input for the FORGE Phase 2 native state model were compiled from historic and FORGE specific characterization efforts. The simulations look to find the in-situ pressure, temperature, and stress distributions in the vicinity of the Utah FORGE site. The purpose of the native state model was to establish a baseline for all other modeling analyses—so that the whole modeling team can start from a consistent set of conditions which makes for comparisonmore »« less
Utah FORGE: Earth Model Native State Simulation Results

Dataset Podgorney, Robert

Utah FORGE phase 2C Native State Simulation zip contains the data used for the boundary conditions and subsequent native state simulation results obtained using the simulation code FALCON. Data are from the nodes of the simulation domain, with used a uniform 50m spacing over a 2500 X 2500 X 2750m domain approximately centered on the FORGE footprint. There is also a read me text file, that is included, containing metadata. The Reservoir Porosity and Upscale DFN Permeability zip contains the data used for the spatial distribution of the anisotropic permeability and porosity used in the native state simulation of themore »« less
Utah FORGE Groundwater Levels: Updated March 2022

Dataset Kirby, Stefan

This Excel spreadsheet contains Utah FORGE groundwater data for wells WOW2 and WOW3. The data was updated on March 16th, 2022 and contains legacy data. Groundwater data includes the level, offset, date, and time for each measurement. Temperature, drift, water elevation and other parameters are recorded. Figures in the data include a water elevation over time plot. Legacy data ranges from year 1976 to 2019 and updated data ranges from year 2019 to 2021.
Utah FORGE: Updated Phase 2C Well Location Coordinates

Dataset Hardwick, Christian

Utah FORGE has been established to develop, test, and improve the technologies and techniques required to develop EGS-type geothermal resources. Drilling of the first of two deep deviated wells, 16A(78)-32, will begin in the second half of 2020. This well will serve as the injection well for the injection-production well pair that will form the heart of the laboratory. This submission contains an archive of well location data within the Roosevelt Hot Springs geothermal area. An Excel spreadsheet is included containing updated GPS data for Utah FORGE wells drilled during Phase 2C (56-32, 68-32, 78-32). This data was collected overmore »« less
Utah FORGE: Updated Phase 2C Well Location Coordinates

Dataset Hardwick, Christian

Utah FORGE has been established to develop, test, and improve the technologies and techniques required to develop EGS-type geothermal resources. Drilling of the first of two deep deviated wells, 16A(78)-32, will begin in the second half of 2020. This well will serve as the injection well for the injection-production well pair that will form the heart of the laboratory. This submission contains an archive of well location data within the Roosevelt Hot Springs geothermal area. An Excel spreadsheet is included containing updated GPS data for Utah FORGE wells drilled during Phase 2C (56-32, 68-32, 78-32). This data was collected overmore »« less

Similar Records