Utah FORGE: Phase 3 InSAR Study Results

Feigl, Kurt

doi:10.15121/1671637

Title: Utah FORGE: Phase 3 InSAR Study Results

Dataset
Other Related Research

Abstract

Ground movement is evaluated through analysis of Interferometric Synthetic Aperture Radar (InSAR) interferograms. Results indicate there has been no detectable ground movement at millimeter scale. The zipped file in this submission contains a report, maps, and results from the InSAR Phase 3 study done to determine ground crustal deformation, if any, in the Utah FORGE area. The data used to facilitate this study included synthetic aperture radar data acquired by the TerraSAR-X and TanDEM-X satellite missions operated by the German Space Agency (DLR). It is accompanied by a README.txt file which further describes each included dataset.

Authors:

Feigl, Kurt

Department of Geoscience - University of Wisconsin-Madison

Publication Date:: Wed Dec 31 04:00:00 UTC 1969

Other Number(s):: 1251

DOE Contract Number:: EE0007080

Research Org.:: DOE Geothermal Data Repository; Department of Geoscience - University of Wisconsin-Madison

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Geothermal Technologies Program (EE-2C)

Collaborations:: Department of Geoscience - University of Wisconsin-Madison

Subject:: 15 GEOTHERMAL ENERGY; EGS; InSar; Interferometric synthetic aperture radar; MATLAB; Milford; Roosevelt Hot Springs; Utah FORGE; Utah geothermal; bedrock; crustal; crustal deformation; deformation; energy; geodesy; geology; geothermal; ground deformation; map; mean rate of change; remote sensing; subsidence

OSTI Identifier:: 1671637

DOI:: https://doi.org/10.15121/1671637

Citation Formats


                    Feigl, Kurt. Utah FORGE: Phase 3 InSAR Study Results.  United States: N. p., 1969. 
        Web.  doi:10.15121/1671637.

Copy to clipboard


                    Feigl, Kurt. Utah FORGE: Phase 3 InSAR Study Results.  United States.  doi:https://doi.org/10.15121/1671637

Copy to clipboard


                    Feigl, Kurt. 1969.  
"Utah FORGE: Phase 3 InSAR Study Results".  United States.  doi:https://doi.org/10.15121/1671637.  https://www.osti.gov/servlets/purl/1671637. Pub date:Wed Dec 31 04:00:00 UTC 1969

Copy to clipboard


                    
@article{osti_1671637,

  title        = {Utah FORGE: Phase 3 InSAR Study Results},

  author       = {Feigl, Kurt},

  abstractNote = {Ground movement is evaluated through analysis of Interferometric Synthetic Aperture Radar (InSAR) interferograms. Results indicate there has been no detectable ground movement at millimeter scale. The zipped file in this submission contains a report, maps, and results from the InSAR Phase 3 study done to determine ground crustal deformation, if any, in the Utah FORGE area. The data used to facilitate this study included synthetic aperture radar data acquired by the TerraSAR-X and TanDEM-X satellite missions operated by the German Space Agency (DLR). It is accompanied by a README.txt file which further describes each included dataset.},

  doi          = {10.15121/1671637},

  journal      = {},

  number       = ,

  volume       = ,

  place        = {United States},

  year         = {Wed Dec 31 04:00:00 UTC 1969},

  month        = {Wed Dec 31 04:00:00 UTC 1969}

}

Copy to clipboard

Dataset:

View Dataset

DOI: https://doi.org/10.15121/1671637

Save / Share:

Export Metadata

Save to My Library

Similar records in DOE Data Explorer and OSTI.GOV collections:

Utah FORGE: Phase 3 InSAR Study Results

Dataset Feigl, Kurt

Ground movement is evaluated through analysis of Interferometric Synthetic Aperture Radar (InSAR) interferograms. Results indicate there has been no detectable ground movement at millimeter scale. The zipped file in this submission contains a report, maps, and results from the InSAR Phase 3 study done to determine ground crustal deformation, if any, in the Utah FORGE area. The data used to facilitate this study included synthetic aperture radar data acquired by the TerraSAR-X and TanDEM-X satellite missions operated by the German Space Agency (DLR). It is accompanied by a README.txt file which further describes each included dataset.
Utah FORGE: InSAR Data 2019

Dataset Feigl, Kurt ; Batzli, Sam ; Reinisch, Elena

This dataset contains Interferometric Synthetic Aperture Radar (InSAR) data used for ground deformation monitoring during Phase 2C of the Utah FORGE project. The dataset includes measurements of the mean rate of range change and associated standard errors, provided in both CSV and NetCDF formats. Supporting materials include histograms, maps, and MATLAB scripts used for data processing, as well as unit vector information describing the satellite's sensor orientation. Compressed archives contain additional metadata and masked range change data for individual interferometric pairs. A README file is included to provide further details on the dataset's structure and contents.
Utah FORGE: InSAR Data Best Pairs

Dataset Batzli, Sam ; Feigl, Kurt

This submission provides Interferometric Synthetic Aperture Radar (InSAR) data covering the Utah FORGE site via the TerraSAR-X and TanDEM-X satellite missions operated by the German Space Agency (DLR). Data was collected between 2019/01/01 and 2023/06/30. Interferometric pairs (interferograms) were created using generic mapping tool GMT-SAR processing software. The best 112 pairs were selected based on having short orbital separations (perpendicular baseline less than 5 meters in absolute value).
Utah FORGE InSAR Data from 2020

Dataset Batzli, Samuel ; Feigl, Kurt

Interferometric Synthetic Aperture Radar data from the TerraSAR-X and the TanDEM-X satellite missions operated by the German Space Agency (DLR). Interferometric pairs (interferograms) were created using generic mapping tool GMT-SAR processing software (see link in Resources). Data from January through December 2020.
Utah FORGE InSAR Data from 2021

Dataset Batzli, Samuel ; Feigl, Kurt

Interferometric Synthetic Aperture Radar data from the TerraSAR-X and the TanDEM-X satellite missions operated by the German Space Agency (DLR). Interferometric pairs (interferograms) were created using generic mapping tool GMT-SAR processing software (see link in Resources). Data from January through November 2021.

Similar Records