Utah FORGE: Phase 3 Ground Water Level Monitoring Data

Kirby, Stefan

doi:10.15121/1671636

Title: Utah FORGE: Phase 3 Ground Water Level Monitoring Data

Dataset
Other Related Research

Abstract

Groundwater data around the Utah FORGE site has been collected to determine the piezometric levels and compositional variability. Field measurements in 2020 are designed to obtain and survey new groundwater wells that have been drilled on the distal periphery of the Utah FORGE project area. The spreadsheet included in this submission contains ground water level data from the Utah FORGE site as monitored from wells WOW-2 and WOW-3. The well locations are also provided as UTM, Zone 12, NAD83 coordinates.

Authors:: Kirby, Stefan

Publication Date:: 1969-12-31

Other Number(s):: 1252

DOE Contract Number:: EE0007080

Research Org.:: USDOE Geothermal Data Repository (United States); Utah geological Survey

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Geothermal Technologies Program (EE-2C)

Collaborations:: Utah geological Survey

Subject:: 15 Geothermal Energy

Keywords:: geothermal; energy; ground water; ground water level; water level; Utah FORGE; FORGE; WOW-2; WOW-3; well data; temperature; corrected; water elevation; groundwater; Roosevelt Hot Springs; Milford; EGS; water table depth; monitoring

Geolocation:: 38.5148,-112.879748|38.483935,-112.879748|38.483935,-112.916367|38.5148,-112.916367|38.5148,-112.879748

OSTI Identifier:: 1671636

DOI:: https://doi.org/10.15121/1671636

Project Location:

Citation Formats


                    Kirby, Stefan. Utah FORGE: Phase 3 Ground Water Level Monitoring Data.  United States: N. p., 1969. 
        Web.  doi:10.15121/1671636.

Copy to clipboard


                    Kirby, Stefan. Utah FORGE: Phase 3 Ground Water Level Monitoring Data.  United States.  doi:https://doi.org/10.15121/1671636

Copy to clipboard


                    Kirby, Stefan. 1969.  
"Utah FORGE: Phase 3 Ground Water Level Monitoring Data".  United States.  doi:https://doi.org/10.15121/1671636.  https://www.osti.gov/servlets/purl/1671636. Pub date:Wed Dec 31 00:00:00 EST 1969

Copy to clipboard


                    
@article{osti_1671636,

  title        = {Utah FORGE: Phase 3 Ground Water Level Monitoring Data},

  author       = {Kirby, Stefan},

  abstractNote = {Groundwater data around the Utah FORGE site has been collected to determine the piezometric levels and compositional variability. Field measurements in 2020 are designed to obtain and survey new groundwater wells that have been drilled on the distal periphery of the Utah FORGE project area. The spreadsheet included in this submission contains ground water level data from the Utah FORGE site as monitored from wells WOW-2 and WOW-3. The well locations are also provided as UTM, Zone 12, NAD83 coordinates.},

  doi          = {10.15121/1671636},

  journal      = {},

  number       = ,

  volume       = ,

  place        = {United States},

  year         = {1969},

  month        = {12}

}

Copy to clipboard

Dataset:

View Dataset

DOI: https://doi.org/10.15121/1671636

Similar records in DOE Data Explorer and OSTI.GOV collections:

Utah FORGE: Phase 3 Ground Water Level Monitoring Data

Dataset Kirby, Stefan

Groundwater data around the Utah FORGE site has been collected to determine the piezometric levels and compositional variability. Field measurements in 2020 are designed to obtain and survey new groundwater wells that have been drilled on the distal periphery of the Utah FORGE project area. The spreadsheet included in this submission contains ground water level data from the Utah FORGE site as monitored from wells WOW-2 and WOW-3. The well locations are also provided as UTM, Zone 12, NAD83 coordinates.
Utah FORGE: Phase 2C Seismic Observation and Ground Water Well Data and Well Locations

Dataset Abraham, Sam ; Mann, Mary ; Curtis, T. ; ...

This submission contains the following data associated with Utah FORGE Phase 2C within the Roosevelt Hot Springs geothermal area: - An ArcGIS shapefile with well locations for wells 58-32, 78-32, 68-32, OH-3, OH-4, WOW-2, and WOW-3. Well 58-32 is the deep test well, wells 68-32 and 78-32 are seismic test wells, and the OH and WOW wells were used for ground water monitoring and temperature gradient logging. - Drilling reports, lithologic logs, daily drilling reports, cuttings logs, and drilling photos for seismic monitoring wells 78-32 and 68-32. - Raw and post-processing temperature logs for wells OH-3, OH-4, WOW-2, and WOW-4.more »« less
Utah FORGE: Phase 3 Magnetotelluric (MT) Data

Dataset Wannamaker, Phil ; Maris, Virginia

New high-quality tensor MT data at 122 sites, including the vertical magnetic field and utilizing ultra-remote referencing, have been acquired over the Utah FORGE project area. The results will be used to delineate the densities of faults and fractures in crystalline basement rocks, to define the heat sources, and to derive baseline 3D resistivity structure for later MT monitoring of temporal changes in resistivity structure following well stimulation in the EGS reservoir. There are three files here related to Utah FORGE magnetotelluric (MT) data acquisition and processing. The FORGE MT EDIs zip file contains the observed MT responses in industry-standardmore »« less
Utah FORGE: Phase 3 Magnetotelluric (MT) Data

Dataset Wannamaker, Phil

New high-quality tensor MT data at 122 sites, including the vertical magnetic field and utilizing ultra-remote referencing, have been acquired over the Utah FORGE project area. The results will be used to delineate the densities of faults and fractures in crystalline basement rocks, to define the heat sources, and to derive baseline 3D resistivity structure for later MT monitoring of temporal changes in resistivity structure following well stimulation in the EGS reservoir. There are three files here related to Utah FORGE magnetotelluric (MT) data acquisition and processing. The FORGE MT EDIs zip file contains the observed MT responses in industry-standardmore »« less
Utah FORGE: Phase 3 Microgravity Data

Dataset Hardwick, Christian

A 4D microgravity survey began in early 2019 in order to benchmark surface and subsurface elevations prior to Phase 3 drilling and stimulation campaigns. Microgravity stations are collocated with GPS deformation benchmarks and use the same location survey data. Surveys are undertaken on a quarterly basis. The focus of current activities is comparative analysis of GPS survey results and InSAR analysis (see GDR Submission 1251) to check seasonal variance and to evaluate possible changes in the groundwater elevation. The attached zip file contains a text file and an Excel spreadsheet containing Utah FORGE Phase 3 processed "final" microgravity data throughmore »« less

Similar Records