Utah FORGE: Drilling Data for Student Competition

Podgorney, Robert; McLennan, John; Moore, Joe

doi:10.15121/1495411

Title: Utah FORGE: Drilling Data for Student Competition

Dataset
Other Related Research

Abstract

Diagnostic drilling data (Pason log files) from Well 58-32 (previously labeled MU-ESW1), which was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site. This dataset includes both raw, unprocessed drilling data recorded at 1Hz and a processed version downscaled to ~0.3m (1 ft) intervals. Diagnostic drilling data were collected to obtain useful information regarding the nature of the subsurface materials and performance of the drilling rig and drilling bits, including rate of penetration (ROP), weight on bit, temperature, pump pressure, etc.

Authors:

Podgorney, Robert; McLennan, John; Moore, Joe

Idaho National Laboratory

Publication Date:: Thu Dec 06 23:00:00 EST 2018

Other Number(s):: 1113

DOE Contract Number:: EE0007080

Research Org.:: DOE Geothermal Data Repository; Idaho National Laboratory

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Geothermal Technologies Program (EE-2C)

Collaborations:: Idaho National Laboratory

Subject:: 15 GEOTHERMAL ENERGY; 58-32; EGS; FORGE; MU-ESW1; Milford; Pason; ROP; Roosevelt Hot Springs; TD; Utah; Utah FORGE; WOB; bits; characterization; data; depth; downscaled; drill; drilling; drilling data; energy; flow; geothermal; log; logs; materials; performance; phase 2b; processed data; pump pressure; rate of penetration; raw data; resource; rig; student competition; subsurface; temperature; torque; weight on bit; well; well data

OSTI Identifier:: 1495411

DOI:: https://doi.org/10.15121/1495411

Citation Formats


                    Podgorney, Robert, McLennan, John, and Moore, Joe. Utah FORGE: Drilling Data for Student Competition.  United States: N. p., 2018. 
        Web.  doi:10.15121/1495411.

Copy to clipboard


                    Podgorney, Robert, McLennan, John, & Moore, Joe. Utah FORGE: Drilling Data for Student Competition.  United States.  doi:https://doi.org/10.15121/1495411

Copy to clipboard


                    Podgorney, Robert, McLennan, John, and Moore, Joe. 2018.  
"Utah FORGE: Drilling Data for Student Competition".  United States.  doi:https://doi.org/10.15121/1495411.  https://www.osti.gov/servlets/purl/1495411. Pub date:Thu Dec 06 23:00:00 EST 2018

Copy to clipboard


                    
@article{osti_1495411,

  title        = {Utah FORGE: Drilling Data for Student Competition},

  author       = {Podgorney, Robert and McLennan, John and Moore, Joe},

  abstractNote = {Diagnostic drilling data (Pason log files) from Well 58-32 (previously labeled MU-ESW1), which was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site. This dataset includes both raw, unprocessed drilling data recorded at 1Hz and a processed version downscaled to ~0.3m (1 ft) intervals. Diagnostic drilling data were collected to obtain useful information regarding the nature of the subsurface materials and performance of the drilling rig and drilling bits, including rate of penetration (ROP), weight on bit, temperature, pump pressure, etc.},

  doi          = {10.15121/1495411},

  journal      = {},

  number       = ,

  volume       = ,

  place        = {United States},

  year         = {Thu Dec 06 23:00:00 EST 2018},

  month        = {Thu Dec 06 23:00:00 EST 2018}

}

Copy to clipboard

Dataset:

View Dataset

DOI: https://doi.org/10.15121/1495411

Save / Share:

Export Metadata

Save to My Library

Similar records in DOE Data Explorer and OSTI.GOV collections:

Utah FORGE: Well Data for Student Competition

Dataset Podgorney, Robert ; McLennan, John ; Moore, Joe ; ...

Well 58-32 (previously labeled MU-ESW1) was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site. Well Accord-1 was drilled decades ago for geothermal exploration purposes. While the conditions encountered in the well were not suitable for developing a conventional hydrothermal system, the information obtained suggested the region may be suitable for an enhanced geothermal system. Geophysical well logs were collected in both wells to obtain useful information regarding there nature of the subsurface materials. For the recent testing of 58-32, the Utah FORGE Project contracted withmore »« less
Utah FORGE: Well 16A(78)-32 Drilling Data

Dataset McLennan, John ; Nash, Greg ; Moore, Joseph ; ...

This dataset includes survey data, drilling data, daily reports, summaries of daily operations, and rig photos from the drilling of Utah FORGE well 16A(78)-32, which is a highly deviated deep well. It was completed 60 days ahead of schedule. Rig move in began 10/22/2020 and drilling commenced on 10/30/2020, and total depth was reached on 12/18/2020. Drilling was followed by a diagnostic fracture injection test (DFIT), logging, and circulating casing. The rig was released on 1/12/2021. The upper part of the well was drilled vertically through approximately 4,700 feet of sediments before penetrating into high strength, crystalline granite. The wellmore »« less
Utah FORGE: Well 16A(78)-32 Drilling Data

Dataset McLennan, John

This dataset includes survey data, drilling data, daily reports, summaries of daily operations, and rig photos from the drilling of Utah FORGE well 16A(78)-32, which is a highly deviated deep well. It was completed 60 days ahead of schedule. Rig move in began 10/22/2020 and drilling commenced on 10/30/2020, and total depth was reached on 12/18/2020. Drilling was followed by a diagnostic fracture injection test (DFIT), logging, and circulating casing. The rig was released on 1/12/2021. The upper part of the well was drilled vertically through approximately 4,700 feet of sediments before penetrating into high strength, crystalline granite. The wellmore »« less
Utah FORGE: Well 56-32 Drilling Data and Logs

Dataset Bristol, Justin ; Caldwell, Steve ; Welch, Virgil ; ...

This dataset consists of drilling data (Pason data spreadsheets, daily reports, days v. depth, mud logs), Schlumberger logs (FMI, shear anisotropy analysis, memory, sonic, array induction/spectral density/dual spaced neutron/gamma ray/caliper, spectral GR/temperature, and Gardner density correlation), and an end of well report (EOWR) for Utah FORGE well 56-32. This is a vertical well that will be used for seismic monitoring. It was drilled between February 7th and February 21st 2021 to a depth of 9,145 feet. More information about this well can be found at: https://utahforge.com/2021/02/09/drilling-progress-of-well-56-32/ (linked below)
Utah FORGE: Well 16B(78)-32 Drilling Data

Dataset McLennan, John ; Mock, Blake ; Swearingen, Leroy ; ...

This drilling data for Utah FORGE well 16B(78)-32 include a well survey, core summary, mud and mud temperature logs, daily reports of the drilling process, and additional data from the Pason oil and gas company. Well 16B(78)-32 serves as the production well for reservoir creation, fluid circulation, and demonstration of heat extraction for the FORGE project. It has been drilled as a doublet approximately 300 feet parallel to and above the injection well 16A(78)-32. The proposed total depth was 10,658 feet, which was exceeded. Spudding began on April 26th, 2023. As of June 20th, 2023, the total depth measured 10,947more »« less

Similar Records