skip to main content
DOE Data Explorer title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Utah FORGE: Stress Logging Data

Abstract

This spreadsheet consist of data and graphs from deep well 58-32 stress testing from 6900 - 7500 ft depth. Measured stress data were used to correct logging predictions of in situ stress. Stress plots shows pore pressure (measured during the injection testing), the total vertical in situ stress (determined from the density logging) and the total maximum and minimum horizontal stresses. The horizontal stresses were determined from the DSI (Dipole Sonic Imager) and corrected to match the direct measurements.

Creator(s)/Author(s):
Publication Date:
Other Number(s):
1032
DOE Contract Number:  
EE0007080
Product Type:
Dataset
Research Org.:
DOE Geothermal Data Repository; Energy and Geoscience Institute at the University of Utah
Sponsoring Org.:
USDOE Office of Energy Efficiency and Renewable Energy (EERE), Geothermal Technologies Program (EE-2C)
Subject:
15 Geothermal Energy
Keywords:
geothermal; energy; well 58-32; stress; 58-32 stress; stress test; 58-32 stress data; 58-32 stress test; Utah FORGE; Utah; Roosevelt Hot Springs; UT; Youngs Modulus; Poisson Ratio; dynamic; pressure; pore pressure; sh max; vertical; horizontal; stress log; logging; log; data; FORGE; EGS; rock properties; rock props; geomechanics; well data; in situ stress; resource; characterization; Milford; stress plot
OSTI Identifier:
1452760
DOI:
10.15121/1452760

Citation Formats

McLennan, John. Utah FORGE: Stress Logging Data. United States: N. p., 2018. Web. doi:10.15121/1452760.
McLennan, John. Utah FORGE: Stress Logging Data. United States. doi:10.15121/1452760.
McLennan, John. 2018. "Utah FORGE: Stress Logging Data". United States. doi:10.15121/1452760. https://www.osti.gov/servlets/purl/1452760. Pub date:Wed Mar 14 00:00:00 EDT 2018
@article{osti_1452760,
title = {Utah FORGE: Stress Logging Data},
author = {McLennan, John},
abstractNote = {This spreadsheet consist of data and graphs from deep well 58-32 stress testing from 6900 - 7500 ft depth. Measured stress data were used to correct logging predictions of in situ stress. Stress plots shows pore pressure (measured during the injection testing), the total vertical in situ stress (determined from the density logging) and the total maximum and minimum horizontal stresses. The horizontal stresses were determined from the DSI (Dipole Sonic Imager) and corrected to match the direct measurements.},
doi = {10.15121/1452760},
journal = {},
number = ,
volume = ,
place = {United States},
year = {2018},
month = {3}
}

Dataset:

Save / Share: