Utah FORGE: Observation Well Data

Nash, Greg

doi:10.15121/1452738

Title: Utah FORGE: Observation Well Data

Dataset
Other Related Research

Abstract

This archive contains temperature data for Roosevelt Hot Springs observation wells OH-1, OH-4, OH-5 and OH-7. There are also mud logs for OH-4. These are old datasets obtained from Rocky Mountain Power for use in the Utah FORGE project. Temperature data were collected in the 1970s and 1980s.

Authors:

Nash, Greg

Energy and Geoscience Institute at the University of Utah

Publication Date:: Thu Feb 22 04:00:00 UTC 2018

Other Number(s):: 1008

DOE Contract Number:: EE0007080

Research Org.:: DOE Geothermal Data Repository; Energy and Geoscience Institute at the University of Utah

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Geothermal Technologies Program (EE-2C)

Collaborations:: Energy and Geoscience Institute at the University of Utah

Subject:: 15 GEOTHERMAL ENERGY; Blundel Power Plant; EGS; FORGE; Milford; OH-1; OH-4; OH-5; OH-7; Roosevelt Hot Springs; Roosevelt Hot Springs Observation Wells; Utah; Utah FORGE; characterization; data; energy; geologic log; geothermal; lithology log; log; mud log; mud logs; observation; resource; temperature; temperature logs; temperature survey; well; well data; well log

OSTI Identifier:: 1452738

DOI:: https://doi.org/10.15121/1452738

Citation Formats


                    Nash, Greg. Utah FORGE: Observation Well Data.  United States: N. p., 2018. 
        Web.  doi:10.15121/1452738.

Copy to clipboard


                    Nash, Greg. Utah FORGE: Observation Well Data.  United States.  doi:https://doi.org/10.15121/1452738

Copy to clipboard


                    Nash, Greg. 2018.  
"Utah FORGE: Observation Well Data".  United States.  doi:https://doi.org/10.15121/1452738.  https://www.osti.gov/servlets/purl/1452738. Pub date:Thu Feb 22 04:00:00 UTC 2018

Copy to clipboard


                    
@article{osti_1452738,

  title        = {Utah FORGE: Observation Well Data},

  author       = {Nash, Greg},

  abstractNote = {This archive contains temperature data for Roosevelt Hot Springs observation wells OH-1, OH-4, OH-5 and OH-7. There are also mud logs for OH-4. These are old datasets obtained from Rocky Mountain Power for use in the Utah FORGE project. Temperature data were collected in the 1970s and 1980s.},

  doi          = {10.15121/1452738},

  journal      = {},

  number       = ,

  volume       = ,

  place        = {United States},

  year         = {Thu Feb 22 04:00:00 UTC 2018},

  month        = {Thu Feb 22 04:00:00 UTC 2018}

}

Copy to clipboard

Dataset:

View Dataset

DOI: https://doi.org/10.15121/1452738

Save / Share:

Export Metadata

Save to My Library

Similar records in DOE Data Explorer and OSTI.GOV collections:

Utah FORGE: GIS Well Temperature Data

Dataset Gwynn, Mark ; Hill, Jay ; Allis, Rick

This is a GIS point feature shapefile representing wells, and their temperatures, that are located in the general Utah FORGE area near Milford, Utah. There are also fields that represent interpolated temperature values at depths of 200 m, 1000 m, 2000 m, 3000 m, and 4000 m. in degrees Fahrenheit. The temperature values at specific depths as mentioned above were derived as follows. In cases where the well reached a given depth (200 m and 1, 2, 3, or 4 km), the temperature is the measured temperature. For the shallower wells (and at deeper depths in the wells reaching onemore »« less
Utah FORGE: Well Data for Student Competition

Dataset Podgorney, Robert ; McLennan, John ; Moore, Joe ; ...

Well 58-32 (previously labeled MU-ESW1) was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site. Well Accord-1 was drilled decades ago for geothermal exploration purposes. While the conditions encountered in the well were not suitable for developing a conventional hydrothermal system, the information obtained suggested the region may be suitable for an enhanced geothermal system. Geophysical well logs were collected in both wells to obtain useful information regarding there nature of the subsurface materials. For the recent testing of 58-32, the Utah FORGE Project contracted withmore »« less
Utah FORGE: Phase 2C Seismic Observation and Ground Water Well Data and Well Locations

Dataset Abraham, Sam ; Mann, Mary ; Curtis, T. ; ...

This submission contains the following data associated with Utah FORGE Phase 2C within the Roosevelt Hot Springs geothermal area: - An ArcGIS shapefile with well locations for wells 58-32, 78-32, 68-32, OH-3, OH-4, WOW-2, and WOW-3. Well 58-32 is the deep test well, wells 68-32 and 78-32 are seismic test wells, and the OH and WOW wells were used for ground water monitoring and temperature gradient logging. - Drilling reports, lithologic logs, daily drilling reports, cuttings logs, and drilling photos for seismic monitoring wells 78-32 and 68-32. - Raw and post-processing temperature logs for wells OH-3, OH-4, WOW-2, and WOW-4.more »« less
Utah FORGE: Regional Well Locations

Dataset Nash, Greg

This archive contains a GIS point feature shapefile that shows the locations of wells in the general region of the Utah FORGE project, near Roosevelt Hot Springs. This includes Utah FORGE deep well 58-32 and wells for which data has been uploaded to the Geothermal Data Repository. The attribute table has a field that contains well names.
Utah FORGE: Heat Flow Contours and Well Data

Dataset Moore, Joe

This submission contains a shapefile of heat flow contour lines around the FORGE site located in Milford, Utah. The model was interpolated from data points in the Milford_wells shapefile. This heat flow model was interpolated from 66 data points using the kriging method in Geostatistical Analyst tool of ArcGIS. The resulting model was smoothed 100%. The well dataset contains 59 wells from various sources, with lat/long coordinates, temperature, quality, basement depth, and heat flow. This data was used to make models of the specific characteristics.

Similar Records