Utah FORGE: X-Ray Diffraction Data

Nash, Greg; Jones, Clay

doi:10.15121/1452734

Title: Utah FORGE: X-Ray Diffraction Data

Dataset
Other Related Research

Abstract

This dataset contains X-ray diffraction (XRD) data taken from wells and outcrops as part of the DOE GTO supported Utah FORGE project located near Roosevelt Hot Springs. It contains an Excel spreadsheet with the XRD data, a text file with sample site names, types, and locations in UTM, Zone 12, NAD83 coordinates, and a GIS shapefile of the sample locations with attributes.

Authors:

Nash, Greg; Jones, Clay

Energy and Geoscience Institute at the University of Utah

Publication Date:: Tue Feb 06 23:00:00 EST 2018

Other Number(s):: 1005

DOE Contract Number:: EE0007080

Research Org.:: DOE Geothermal Data Repository; Energy and Geoscience Institute at the University of Utah

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Geothermal Technologies Program (EE-2C)

Collaborations:: Energy and Geoscience Institute at the University of Utah

Subject:: 15 GEOTHERMAL ENERGY; ArcGIS; EGS; FORGE; Milford; Roosevelt Hot Springs; UT; Utah; Utah FORGE; X-Ray diffraction; XRD; characterization; crystalline minerals; crystallography; energy; geochemistry; geospatial data; geothermal; lithology; mineralogy; outcrop; resource; shapefile; well data; xray

OSTI Identifier:: 1452734

DOI:: https://doi.org/10.15121/1452734

Citation Formats


                    Nash, Greg, and Jones, Clay. Utah FORGE: X-Ray Diffraction Data.  United States: N. p., 2018. 
        Web.  doi:10.15121/1452734.

Copy to clipboard


                    Nash, Greg, & Jones, Clay. Utah FORGE: X-Ray Diffraction Data.  United States.  doi:https://doi.org/10.15121/1452734

Copy to clipboard


                    Nash, Greg, and Jones, Clay. 2018.  
"Utah FORGE: X-Ray Diffraction Data".  United States.  doi:https://doi.org/10.15121/1452734.  https://www.osti.gov/servlets/purl/1452734. Pub date:Tue Feb 06 23:00:00 EST 2018

Copy to clipboard


                    
@article{osti_1452734,

  title        = {Utah FORGE: X-Ray Diffraction Data},

  author       = {Nash, Greg and Jones, Clay},

  abstractNote = {This dataset contains X-ray diffraction (XRD) data taken from wells and outcrops as part of the DOE GTO supported Utah FORGE project located near Roosevelt Hot Springs. It contains an Excel spreadsheet with the XRD data, a text file with sample site names, types, and locations in UTM, Zone 12, NAD83 coordinates, and a GIS shapefile of the sample locations with attributes.},

  doi          = {10.15121/1452734},

  journal      = {},

  number       = ,

  volume       = ,

  place        = {United States},

  year         = {Tue Feb 06 23:00:00 EST 2018},

  month        = {Tue Feb 06 23:00:00 EST 2018}

}

Copy to clipboard

Dataset:

View Dataset

DOI: https://doi.org/10.15121/1452734

Save / Share:

Export Metadata

Save to My Library

Similar records in DOE Data Explorer and OSTI.GOV collections:

Utah FORGE Well 16A(78)-32 X-ray Diffraction Data

Dataset Jones, Clay

This submission contains x-ray diffraction data taken from 3,600 to 10,987 feet deep in well 16A(78)-32 in the Roosevelt Hot Springs Geothermal Area as part of the Utah FORGE project. 78 rock samples were taken. Samples are taken in a range of ten feet at 100 foot increments. Mineral abundances are given in weight percent of the sample, with results rounded to the nearest whole number. Fields marked with tr (trace) indicate that mineral is present, but that its abundance calculated from the Rietveld refinement was less than one weight percent; that it was observed in the clay-sized fraction, butmore »« less
Utah FORGE: Powder X-ray Diffraction Data from Well 16A(78)-32 Core

Dataset Kroll, Kayla ; Davila, Gabriela ; Kottkamp, Wayne ; ...

This dataset from Lawrence Livermore National Laboratory (LLNL) consists of four raw X-ray diffraction (XRD) scans and preliminary results of quantitative XRD analysis. The scanned samples were prepared from four subcores, which came from various depths of the FORGE well 16A(78)-32 core. Desired core lengths were selected from available core photos (on GDR), provided by FORGE personnel, and subcored at LLNL. The XRD scans were collected in May 2023 at LLNL as pre-experimental characterization data for these subcores, which will be used in core-flooding experiments at LLNL and in triaxial direct shear experiments at Los Alamos National Laboratory as partmore »« less
Utah FORGE: Groundwater Data

Dataset Moore, Joe

This submission includes two modeled drawdown scenarios with new supply well locations, a total dissolved solids (TDS) concentration grid (raster dataset representing the spatial distribution of TDS), and an excel spreadsheet containing well data.
Utah FORGE: Southwestern Utah Magnetotelluric (MT) Data

Dataset Wannamaker, Philip ; Marris, Virginie

This comprehensive magnetotellurics (MT) dataset, which covers southwestern Utah, integrates 600 sites from various surveys, including those from the Utah FORGE, SubTER, and Play Fairway projects, all of which are linked below. The core of this dataset is the use of a 3D finite element (FE) algorithm for inversion imaging, allowing for detailed analysis of the MT data. Provided here are all .edi files, the 3D finite element mesh (with a readme file), graphic slices, node graphics, resistivity graphics, and reports on the acquisition areas and inversion.
Utah FORGE: TEM and Gravity Data

Dataset Hardwick, Christian ; Nash, Greg

This submission includes a gravity data in text format and as a GIS point shapefile and transient electromagnetic (TEM) raw data. Each text file additionally contains location data (UTM Zone 12, NAD83) and elevation (meters) data for that station. The gravity data shapefile was in part downloaded from PACES, University of Texas at El Paso, http://gis.utep.edu/subpages/GMData.html, and in part collected by the Utah Geological Survey (UGS) as part of the DOE GTO supported Utah FORGE geothermal energy project near Milford, Utah. The PACES data were examined and scrubbed to eliminate any questionable data. A 2.67 g/cm^3 reduction density was usedmore »« less

Similar Records