Utah FORGE: Temperature Contours

Moore, Joe

doi:10.15121/1405029

Title: Utah FORGE: Temperature Contours

Dataset
Other Related Research

Abstract

This submission contains several ArcGIS shapefiles, each with Temperature contour lines at different depths. Subsurface temperature were important for characterizing the geothermal system beneath the FORGE site in Milford, Utah.

Authors:: Moore, Joe

Publication Date:: Wed Dec 31 00:00:00 EST 1969

Other Number(s):: 711

DOE Contract Number:: EE0007080

Research Org.:: USDOE Geothermal Data Repository (United States); Energy and Geoscience Institute at the University of Utah

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Geothermal Technologies Program (EE-2C)

Collaborations:: Energy and Geoscience Institute at the University of Utah

Subject:: 15 Geothermal Energy

Keywords:: geothermal; EGS; Milford; FORGE; temperature; contour; Utah; contour lines; Utah FORGE; geospatial data; shapefile; resource; characterization; Roosevelt Hot Springs; processed data

Geolocation:: 38.6867158822,-112.652795604|38.2867158822,-112.652795604|38.2867158822,-113.052795604|38.6867158822,-113.052795604|38.6867158822,-112.652795604

OSTI Identifier:: 1405029

DOI:: https://doi.org/10.15121/1405029

Project Location:

Citation Formats


                    Moore, Joe. Utah FORGE: Temperature Contours.  United States: N. p., 1969. 
        Web.  doi:10.15121/1405029.

Copy to clipboard


                    Moore, Joe. Utah FORGE: Temperature Contours.  United States.  doi:https://doi.org/10.15121/1405029

Copy to clipboard


                    Moore, Joe. 1969.  
"Utah FORGE: Temperature Contours".  United States.  doi:https://doi.org/10.15121/1405029.  https://www.osti.gov/servlets/purl/1405029. Pub date:Wed Dec 31 00:00:00 EST 1969

Copy to clipboard


                    
@article{osti_1405029,

  title        = {Utah FORGE: Temperature Contours},

  author       = {Moore, Joe},

  abstractNote = {This submission contains several ArcGIS shapefiles, each with Temperature contour lines at different depths. Subsurface temperature were important for characterizing the geothermal system beneath the FORGE site in Milford, Utah.},

  doi          = {10.15121/1405029},

  journal      = {},

  number       = ,

  volume       = ,

  place        = {United States},

  year         = {Wed Dec 31 00:00:00 EST 1969},

  month        = {Wed Dec 31 00:00:00 EST 1969}

}

Copy to clipboard

Dataset:

View Dataset

DOI: https://doi.org/10.15121/1405029

Save / Share:

Export Metadata

Save to My Library

Similar records in DOE Data Explorer and OSTI.GOV collections:

Utah FORGE: Temperature Contours at 200 m

Dataset Moore, Joe

The individual shapefiles in this dataset delineate estimated temperature contours (20, 40, 60, and 80 deg C) at a depth of 200 m in the Milford, Utah FORGE area. Contours were derived from 86 geothermal, gradient, and other wells drilled in the area since the mid-1970s with depths greater than 50 m. Conductive temperature profiles for wells less than 200 m were extrapolated to determine the temperature at the desired depth. Because 11 wells in the eastern section of the study area (in and around the Mineral Mountains) are at higher elevations compared to those closer to the center ofmore »« less
Utah FORGE: Heat Flow Contours and Well Data

Dataset Moore, Joe

This submission contains a shapefile of heat flow contour lines around the FORGE site located in Milford, Utah. The model was interpolated from data points in the Milford_wells shapefile. This heat flow model was interpolated from 66 data points using the kriging method in Geostatistical Analyst tool of ArcGIS. The resulting model was smoothed 100%. The well dataset contains 59 wells from various sources, with lat/long coordinates, temperature, quality, basement depth, and heat flow. This data was used to make models of the specific characteristics.
Utah FORGE: Milford Site Location, Seismometer Locations, Basin Depth Models, and Potentiometric Contours

Dataset Moore, Joe

This submission includes the geographic extent shapefile of the Milford FORGE site located in Utah, along with a shapefile of seismometer positions throughout the area, and models of basin depth and potentiometric contours.
Utah FORGE: GIS Well Temperature Data

Dataset Gwynn, Mark ; Hill, Jay ; Allis, Rick

This is a GIS point feature shapefile representing wells, and their temperatures, that are located in the general Utah FORGE area near Milford, Utah. There are also fields that represent interpolated temperature values at depths of 200 m, 1000 m, 2000 m, 3000 m, and 4000 m. in degrees Fahrenheit. The temperature values at specific depths as mentioned above were derived as follows. In cases where the well reached a given depth (200 m and 1, 2, 3, or 4 km), the temperature is the measured temperature. For the shallower wells (and at deeper depths in the wells reaching onemore »« less
Utah FORGE: Pressure Temperature Logs from Blundell Well 71-10, Beaver County

Dataset Foster, Kenny

This archive contains an Excel spreadsheet with pressure and temperature logs from PacifiCorp well 71-10. This well is in the Blundell Power Plant geothermal well field near Roosevelt Hot Springs, Beaver County, Utah. The spreadsheet also contains UTM coordinates for the location of the well.

Similar Records