Turbine Depth Optimization Study, Admiralty Inlet, WA

Kawase, Mitsuhiro; Beba, Patricia; Fabien, Brian C.

doi:10.15473/1287271

Title: Turbine Depth Optimization Study, Admiralty Inlet, WA

Dataset
Other Related Research

Abstract

The zipped file contains a directory of data and routines used in the NNMREC turbine depth optimization study (Kawase et al., 2011), and calculation results thereof. For further info, please contact Mitsuhiro Kawase at kawase@uw.edu.

Authors:

Kawase, Mitsuhiro; Beba, Patricia; Fabien, Brian C.

University of Washington

Publication Date:: 2009-11-21

Other Number(s):: 110

Research Org.:: Marine and Hydrokinetic Data Repository (MHKDR); University of Washington

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Wind and Water Technologies Office (EE-4W)

Collaborations:: University of Washington

Subject:: 16 TIDAL AND WAVE POWER; Admiralty Inlet; MHK; NNMREC; Northwest National Marine Renewable Energy Center; Sound and Sea Technology; Turbine power output; WA; Washington; Water velocity; area; average power; average speed; barotropic; calculation results; calculations; capacity contour; capacity factor; code; data; depth; depth optimization; hub height; in-stream; matlab; optimize; power density; power law; pressure; procedure; profile; rated power; rated speed; routines; snohomish; sst; technical report; tidal; tide period; turbine; turbine depth data

OSTI Identifier:: 1287271

DOI:: https://doi.org/10.15473/1287271

Citation Formats


                    Kawase, Mitsuhiro, Beba, Patricia, and Fabien, Brian C. Turbine Depth Optimization Study, Admiralty Inlet, WA.  United States: N. p., 2009. 
        Web.  doi:10.15473/1287271.

Copy to clipboard


                    Kawase, Mitsuhiro, Beba, Patricia, & Fabien, Brian C. Turbine Depth Optimization Study, Admiralty Inlet, WA.  United States.  doi:https://doi.org/10.15473/1287271

Copy to clipboard


                    Kawase, Mitsuhiro, Beba, Patricia, and Fabien, Brian C. 2009.  
"Turbine Depth Optimization Study, Admiralty Inlet, WA".  United States.  doi:https://doi.org/10.15473/1287271.  https://www.osti.gov/servlets/purl/1287271. Pub date:Sat Nov 21 23:00:00 EST 2009

Copy to clipboard


                    
@article{osti_1287271,

  title        = {Turbine Depth Optimization Study, Admiralty Inlet, WA},

  author       = {Kawase, Mitsuhiro and Beba, Patricia and Fabien, Brian C.},

  abstractNote = {The zipped file contains a directory of data and routines used in the NNMREC turbine depth optimization study (Kawase et al., 2011), and calculation results thereof. For further info, please contact Mitsuhiro Kawase at kawase@uw.edu.},

  doi          = {10.15473/1287271},

  journal      = {},

  number       = ,

  volume       = ,

  place        = {United States},

  year         = {2009},

  month        = {11}

}

Copy to clipboard

Dataset:

View Dataset

DOI: https://doi.org/10.15473/1287271

Save / Share:

Export Metadata

Save to My Library

Similar records in DOE Data Explorer and OSTI.GOV collections:

Admiralty Inlet, WA - Tidal Currents

Dataset Thomson, Jim

Acoustic Doppler Current Profiler (ADCP) data from seafloor tripods in Admiralty Inlet, Puget Sound, Washington. Data collected from April 2009 through December 2012.
Admiralty Inlet Advanced Turbulence Measurements: June 2014

Dataset Kilcher, Levi

This data is from measurements at Admiralty Head, in Admiralty Inlet (Puget Sound) in June of 2014. The measurements were made using Inertial Motion Unit (IMU) equipped ADVs mounted on Tidal Turbulence Mooring's (TTMs). The TTM positions the ADV head above the seafloor to make mid-depth turbulence measurements. The inertial measurements from the IMU allows for removal of mooring motion in post processing. The mooring motion has been removed from the stream-wise and vertical velocity signals (u, w). The lateral (v) velocity has some 'persistent motion contamination' due to mooring sway. Each ttm was deployed with two ADVs. The 'top'more »« less
Admiralty Inlet Advanced Turbulence Measurements: May 2015

Dataset Kilcher, Levi

This data is from measurements at Admiralty Head, in Admiralty Inlet (Puget Sound) in May of 2015. The measurements were made using Inertial Motion Unit (IMU) equipped ADVs mounted on a 'StableMoor' (Manufacturer: DeepWater Buoyancy) buoy and a Tidal Turbulence Mooring (TTM). These platforms position ADV heads above the seafloor to make mid-depth turbulence measurements. The inertial measurements from the IMU allows for removal of mooring motion in post processing. The mooring and buoy motion has been removed from the stream-wise and vertical velocity signals (u, w). The lateral (v) velocity has some 'persistent motion contamination' due to mooring sway.more »« less
Admiralty Inlet Hub-Height Turbulence Measurements from June 2012

Dataset Kilcher, Levi

This data is from measurements at Admiralty Head, in Admiralty Inlet. The measurements were made using an IMU equipped ADV mounted on a mooring, the 'Tidal Turbulence Mooring' or 'TTM'. The inertial measurements from the IMU allows for removal of mooring motion in post processing. The mooring motion has been removed from the stream-wise and vertical velocity signals (u, w). The lateral (v) velocity may have some 'persistent motion contamination' due to mooring sway. The ADV was positioned 11m above the seafloor in 58m of water at 48.1515N, 122.6858W. Units ------ - Velocity data (_u, urot, uacc) is in m/s.more »« less
Admiralty Inlet Advanced Turbulence Measurements: Final Data and Code Archive

Dataset Kilcher, Levi ; Thomson, Jim ; Harding, Samuel

Data and code that is not already in a public location that is used in Kilcher, Thomson, Harding, and Nylund (2017) "Turbulence Measurements from Compliant Moorings - Part II: Motion Correction" doi: 10.1175/JTECH-D-16-0213.1. The links point to Python source code used in the publication. All other files are source data used in the publication.

Similar Records