Brady Hot Springs Seismic Modeling Data for Push-Pull Project

Zhang, Rui

doi:10.15121/1464530

Title: Brady Hot Springs Seismic Modeling Data for Push-Pull Project

Dataset
Other Related Research

Abstract

This submission includes synthetic seismic modeling data for the Push-Pull project at Brady Hot Springs, NV. The synthetic seismic is all generated by finite-difference method regarding different fracture and rock properties.

Authors:

Publication Date:: Tue Jul 31 00:00:00 EDT 2018

Other Number(s):: 1082

DOE Contract Number:: EE8421554

Research Org.:: USDOE Geothermal Data Repository (United States); Univ. of Louisville at Lafayette, Lafayette, KY (United States)

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Geothermal Technologies Program (EE-2C)

Collaborations:: University of Louisiana at Lafayette

Subject:: 15 Geothermal Energy

Keywords:: geothermal; energy; seismic; geophysics; active source; velocity; geophysical; data; modeling; numerical; synthetic; Brady Hot Springs; Nevada; NV; fracture; rock; geologic; properties; property; push-pull; finite difference; numerical modeling; VSP; vertical seismic profiling; borehole; fractured; non-fractured; media; CO2; saturation

Geolocation:: 39.9883,-118.8167|39.5883,-118.8167|39.5883,-119.2167|39.9883,-119.2167|39.9883,-118.8167

OSTI Identifier:: 1464530

DOI:: https://doi.org/10.15121/1464530

Project Location:

Citation Formats


                    Zhang, Rui. Brady Hot Springs Seismic Modeling Data for Push-Pull Project.  United States: N. p., 2018. 
        Web.  doi:10.15121/1464530.

Copy to clipboard


                    Zhang, Rui. Brady Hot Springs Seismic Modeling Data for Push-Pull Project.  United States.  doi:https://doi.org/10.15121/1464530

Copy to clipboard


                    Zhang, Rui. 2018.  
"Brady Hot Springs Seismic Modeling Data for Push-Pull Project".  United States.  doi:https://doi.org/10.15121/1464530.  https://www.osti.gov/servlets/purl/1464530. Pub date:Tue Jul 31 00:00:00 EDT 2018

Copy to clipboard


                    
@article{osti_1464530,

  title        = {Brady Hot Springs Seismic Modeling Data for Push-Pull Project},

  author       = {Zhang, Rui},

  abstractNote = {This submission includes synthetic seismic modeling data for the Push-Pull project at Brady Hot Springs, NV. The synthetic seismic is all generated by finite-difference method regarding different fracture and rock properties.},

  doi          = {10.15121/1464530},

  journal      = {},

  number       = ,

  volume       = ,

  place        = {United States},

  year         = {Tue Jul 31 00:00:00 EDT 2018},

  month        = {Tue Jul 31 00:00:00 EDT 2018}

}

Copy to clipboard

Dataset:

View Dataset

DOI: https://doi.org/10.15121/1464530

Save / Share:

Export Metadata

Save to My Library

Similar records in DOE Data Explorer and OSTI.GOV collections:

Simulations of Brady's-Type Fault Undergoing CO2 Push-Pull: Pressure-Transient and Sensitivity Analysis

Dataset Jung, Yoojin ; Doughty, Christine

Input and output files used for fault characterization through numerical simulation using iTOUGH2. The synthetic data for the push period are generated by running a forward simulation (input parameters are provided in iTOUGH2 Brady GF6 Input Parameters.txt [InvExt6i.txt]). In general, the permeability of the fault gouge, damage zone, and matrix are assumed to be unknown. The input and output files are for the inversion scenario where only pressure transients are available at the monitoring well located 200 m above the injection well and only the fault gouge permeability is estimated. The input files are named InvExt6i, INPUT.tpl, FOFT.ins, CO2TAB, andmore »« less
Material Properties for Brady Hot Springs Nevada USA from PoroTomo Project

Dataset Feigl, Kurt L. ; PoroTomo Team,

The PoroTomo team has completed inverse modeling of the three data sets (seismology, geodesy, and hydrology) individually, as described previously. The estimated values of the material properties are registered on a three-dimensional grid with a spacing of 25 meters between nodes. The material properties are listed an Excel file. Figures show planar slices in three sets: horizontal slices in a planes normal to the vertical Z axis (Z normal), vertical slices in planes perpendicular to the dominant strike of the fault system (X normal), and vertical slices in planes parallel to the dominant strike of the fault system (Y normal).more »« less
Analysis of Existing InSAR Data Brady Hot Springs Geothermal Area

Dataset Feigl, Kurt

Attributes of synthetic aperture radar (SAR) data acquired by TerraSAR-X and TanDEM-X satellite missions and archived at WInSAR facility.
Raw Pressure Data from Observation Wells at Brady's Hot Springs

Dataset Lim, David

This .csv files contain the raw water pressure data from three observation wells during pumping tests performed in the Spring of 2016. Included is a "read me" file explaining the details of where and how the data were collected.
Bradys Hot Springs Ambient Noise Correlation Functions (Initial Waveforms)

Dataset Matzel, Eric

These files are ambient noise correlation (ANC) functions calculated for 11 days of continuous seismic data recorded by the Lawrence Berkeley network in the Brady geothermal field. These are SAC formatted seismic waveforms. The stations included are BPB04, BPB05, BPB07, BPB08, BPRT1, BPRT2, BPRT3, BPRT5, BRB10, BRP01, BRP02, BRP03, BRP04, BPR06, and BRP09 The original data were cut into hour long traces and processed by differentiating, removing the mean, removing the trend, applying a 1% taper, whitening, removing the mean and trend again, and converting to single bit traces. The data were then correlated with those from other stations andmore »« less

Similar Records