skip to main content

Title: Ground Source Heat Pump Computational Results

This data submission includes simulation results for ground loop heat pump systems located in 6 different cities across the United States. The cities are Boston, MA, Dayton, OH, Omaha, NE, Orlando, FL, Sacramento, CA, and St. Paul, MN. These results were obtained from the two-dimensional geothermal computer code called GEO2D. GEO2D was written as part of this DOE funded grant. The results included in this submission for each of the 6 cities listed above are: 1) specific information on the building being heated or cooled by the ground loop geothermal system, 2) some extreme values for the building heating and cooling loads during the year, 3) the inputs required to carry out the simulation, 4) a plot of the hourly building heating and cooling loads throughout the year, 5) a plot of the fluid temperature exiting the ground loop for a 20 year period, 6) a plot of the heat exchange between the ground loop and the ground for a 20 year period, and 7) ground and ground loop temperature contour plots at different times of the year for the 20 year period.
Authors:
Publication Date:
Report Number(s):
237
DOE Contract Number:
EE0002805
Product Type:
Dataset
Research Org(s):
DOE Geothermal Data Repository; Wright State University
Collaborations:
Wright State University
Sponsoring Org:
USDOE Office of Energy Efficiency and Renewable Energy (EERE), Geothermal Technologies Program (EE-2C)
Subject:
15 Geothermal Energy; geothermal; ground source heat pump systems; computational results; full temperature field results; temperature profiles; home heating and cooling load information; Sacramento CA; St. Paul MN.; Boston MA; Omaha NE; Orlando FL; Dayton OH
OSTI Identifier:
1261917

James Menart. Ground Source Heat Pump Computational Results. United States: N. p., Web. doi:10.15121/1261917.
James Menart. Ground Source Heat Pump Computational Results. United States. doi:10.15121/1261917.
James Menart. 2013. "Ground Source Heat Pump Computational Results". United States. doi:10.15121/1261917. https://www.osti.gov/servlets/purl/1261917.
@misc{osti_1261917,
title = {Ground Source Heat Pump Computational Results},
author = {James Menart},
abstractNote = {This data submission includes simulation results for ground loop heat pump systems located in 6 different cities across the United States. The cities are Boston, MA, Dayton, OH, Omaha, NE, Orlando, FL, Sacramento, CA, and St. Paul, MN. These results were obtained from the two-dimensional geothermal computer code called GEO2D. GEO2D was written as part of this DOE funded grant. The results included in this submission for each of the 6 cities listed above are: 1) specific information on the building being heated or cooled by the ground loop geothermal system, 2) some extreme values for the building heating and cooling loads during the year, 3) the inputs required to carry out the simulation, 4) a plot of the hourly building heating and cooling loads throughout the year, 5) a plot of the fluid temperature exiting the ground loop for a 20 year period, 6) a plot of the heat exchange between the ground loop and the ground for a 20 year period, and 7) ground and ground loop temperature contour plots at different times of the year for the 20 year period.},
doi = {10.15121/1261917},
year = {2013},
month = {7} }
  1. The Geothermal Data Repository (GDR) is the submission point for all data collected from researchers funded by the U.S. Department of Energy's Geothermal Technologies Office (DOE GTO). The DOE GTO is providing access to its geothermal project information through the GDR. The GDR is powered by OpenEI, an energy information portal sponsored by the U.S. Department of Energy and developed by the National Renewable Energy Laboratory (NREL).
No associated Collections found.