GEO3D - Three-Dimensional Computer Model of a Ground Source Heat Pump System

Menart, James

doi:10.15121/1252461

Title: GEO3D - Three-Dimensional Computer Model of a Ground Source Heat Pump System

Dataset
Other Related Research

Abstract

This file is the setup file for GEO3D, a computer program written by Jim Menart to simulate vertical wells in conjunction with a heat pump for ground source heat pump (GSHP) systems. This is a very detailed three-dimensional computer model. This program produces detailed heat transfer and temperature field information for a vertical GSHP system.

Authors:: Menart, James

Publication Date:: Fri Jun 07 00:00:00 EDT 2013

Other Number(s):: 232

DOE Contract Number:: EE0002805

Research Org.:: USDOE Geothermal Data Repository (United States); Wright State University

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Renewable Power Office. Geothermal Technologies Program (EE-4G)

Collaborations:: Wright State University

Subject:: 15 Geothermal Energy

Keywords:: geothermal; ground source heat pump systems; computer program; vertical geothermal well; GEO3D; vertical GSHP system; computer model; 3D model; heat pump; ground source heat pump computer program; heat pumps; GSHP; heat; transfer; code; program; 3D; three dimensional

Geolocation:: 75.0714,-53.8316|13.518,-53.8316|13.518,-167.7267|75.0714,-167.7267|75.0714,-53.8316

OSTI Identifier:: 1252461

DOI:: https://doi.org/10.15121/1252461

Project Location:

Citation Formats


                    Menart, James. GEO3D - Three-Dimensional Computer Model of a Ground Source Heat Pump System.  United States: N. p., 2013. 
        Web.  doi:10.15121/1252461.

Copy to clipboard


                    Menart, James. GEO3D - Three-Dimensional Computer Model of a Ground Source Heat Pump System.  United States.  doi:https://doi.org/10.15121/1252461

Copy to clipboard


                    Menart, James. 2013.  
"GEO3D - Three-Dimensional Computer Model of a Ground Source Heat Pump System".  United States.  doi:https://doi.org/10.15121/1252461.  https://www.osti.gov/servlets/purl/1252461. Pub date:Fri Jun 07 00:00:00 EDT 2013

Copy to clipboard


                    
@article{osti_1252461,

  title        = {GEO3D - Three-Dimensional Computer Model of a Ground Source Heat Pump System},

  author       = {Menart, James},

  abstractNote = {This file is the setup file for GEO3D, a computer program written by Jim Menart to simulate vertical wells in conjunction with a heat pump for ground source heat pump (GSHP) systems. This is a very detailed three-dimensional computer model. This program produces detailed heat transfer and temperature field information for a vertical GSHP system.},

  doi          = {10.15121/1252461},

  journal      = {},

  number       = ,

  volume       = ,

  place        = {United States},

  year         = {Fri Jun 07 00:00:00 EDT 2013},

  month        = {Fri Jun 07 00:00:00 EDT 2013}

}

Copy to clipboard

Dataset:

View Dataset

DOI: https://doi.org/10.15121/1252461

Save / Share:

Export Metadata

Save to My Library

Similar records in DOE Data Explorer and OSTI.GOV collections:

GEO2D - Two-Dimensional Computer Model of a Ground Source Heat Pump System

Dataset Menart, James

This file contains a zipped file that contains many files required to run GEO2D. GEO2D is a computer code for simulating ground source heat pump (GSHP) systems in two-dimensions. GEO2D performs a detailed finite difference simulation of the heat transfer occurring within the working fluid, the tube wall, the grout, and the ground. Both horizontal and vertical wells can be simulated with this program, but it should be noted that the vertical wall is modeled as a single tube. This program also models the heat pump in conjunction with the heat transfer occurring. GEO2D simulates the heat pump and groundmore »« less
Ground Source Heat Pump Computational Results

Dataset Menart, James

This data submission includes simulation results for ground loop heat pump systems located in 6 different cities across the United States. The cities are Boston, MA, Dayton, OH, Omaha, NE, Orlando, FL, Sacramento, CA, and St. Paul, MN. These results were obtained from the two-dimensional geothermal computer code called GEO2D. GEO2D was written as part of this DOE funded grant. The results included in this submission for each of the 6 cities listed above are: 1) specific information on the building being heated or cooled by the ground loop geothermal system, 2) some extreme values for the building heating andmore »« less
G-Function Library for Modeling Vertical Bore Ground Heat Exchanger

Dataset West, Timothy ; Cook, Jack ; Spitler, Jeffrey ; ...

This library contains g-functions (thermal response functions) for standard, regularly spaced vertical borehole ground heat exchangers. In total, it contains 34, 321 configurations. To permit interpolation, each configuration has g-functions for heights of 24, 48, 96, 192, and 384 m. All the g-functions were calculated with burial depths of 2m, and borehole diameters of 15 to 17.5 cm, depending on height. In configurations with uniform spacing, the spacing between the boreholes is set to 5m, though it can be scaled to other horizontal spacings.
Recovery Act: Finite Volume Based Computer Program for Ground Source Heat Pump Systems

Technical Report James A Menart, Professor

This report is a compilation of the work that has been done on the grant DE-EE0002805 entitled Finite Volume Based Computer Program for Ground Source Heat Pump Systems. The goal of this project was to develop a detailed computer simulation tool for GSHP (ground source heat pump) heating and cooling systems. Two such tools were developed as part of this DOE (Department of Energy) grant; the first is a two-dimensional computer program called GEO2D and the second is a three-dimensional computer program called GEO3D. Both of these simulation tools provide an extensive array of results to the user. A uniquemore »« less
Finite Volume Based Computer Program for Ground Source Heat Pump System

Technical Report Menart, James A.

This report is a compilation of the work that has been done on the grant DE-EE0002805 entitled ?Finite Volume Based Computer Program for Ground Source Heat Pump Systems.? The goal of this project was to develop a detailed computer simulation tool for GSHP (ground source heat pump) heating and cooling systems. Two such tools were developed as part of this DOE (Department of Energy) grant; the first is a two-dimensional computer program called GEO2D and the second is a three-dimensional computer program called GEO3D. Both of these simulation tools provide an extensive array of results to the user. A uniquemore »« less

Similar Records