Temperature and Pressure Data Brady Monitoring Well SP-2

Akerley, John

doi:10.15121/1176860

Title: Temperature and Pressure Data Brady Monitoring Well SP-2

Dataset
Other Related Research

Abstract

Static Pressure and Temperature Log for Brady monitor well SP-2. This data was taken from Well SP-2 which is part of the Brady Hot Springs Geothermal Site. The data contains pressure and temperature vs depth data for RIH (run in hole) Static conditions and POOH (pull out of hole) Static conditions. The data was recorded on 2/18/2015 and measurements reach a depth of 4392 feet.

Authors:: Akerley, John

Publication Date:: Thu Jan 01 00:00:00 EST 2015

Other Number(s):: 474

DOE Contract Number:: EE0006760

Research Org.:: USDOE Geothermal Data Repository (United States); Univ. of Wisconsin, Madison, WI (United States)

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Renewable Power Office. Geothermal Technologies Program (EE-4G)

Collaborations:: Ormat Technologies Inc

Subject:: 15 Geothermal Energy

Keywords:: geothermal; Brady; Nevada; Temperature Log; Pressure Log; SP-2; pressure; temperature; well; well data; borehole; RIH; POOH; depth

Geolocation:: 39.9883,-118.8167|39.5883,-118.8167|39.5883,-119.2167|39.9883,-119.2167|39.9883,-118.8167

OSTI Identifier:: 1176860

DOI:: https://doi.org/10.15121/1176860

Project Location:

Citation Formats


                    Akerley, John. Temperature and Pressure Data Brady Monitoring Well SP-2.  United States: N. p., 2015. 
        Web.  doi:10.15121/1176860.

Copy to clipboard


                    Akerley, John. Temperature and Pressure Data Brady Monitoring Well SP-2.  United States.  doi:https://doi.org/10.15121/1176860

Copy to clipboard


                    Akerley, John. 2015.  
"Temperature and Pressure Data Brady Monitoring Well SP-2".  United States.  doi:https://doi.org/10.15121/1176860.  https://www.osti.gov/servlets/purl/1176860. Pub date:Thu Jan 01 00:00:00 EST 2015

Copy to clipboard


                    
@article{osti_1176860,

  title        = {Temperature and Pressure Data Brady Monitoring Well SP-2},

  author       = {Akerley, John},

  abstractNote = {Static Pressure and Temperature Log for Brady monitor well SP-2. This data was taken from Well SP-2 which is part of the Brady Hot Springs Geothermal Site. The data contains pressure and temperature vs depth data for RIH (run in hole) Static conditions and POOH (pull out of hole) Static conditions. The data was recorded on 2/18/2015 and measurements reach a depth of 4392 feet.},

  doi          = {10.15121/1176860},

  journal      = {},

  number       = ,

  volume       = ,

  place        = {United States},

  year         = {Thu Jan 01 00:00:00 EST 2015},

  month        = {Thu Jan 01 00:00:00 EST 2015}

}

Copy to clipboard

Dataset:

View Dataset

DOI: https://doi.org/10.15121/1176860

Save / Share:

Export Metadata

Save to My Library

Similar records in DOE Data Explorer and OSTI.GOV collections:

Raw Pressure Data from Observation Wells at Brady's Hot Springs

Dataset Lim, David

This .csv files contain the raw water pressure data from three observation wells during pumping tests performed in the Spring of 2016. Included is a "read me" file explaining the details of where and how the data were collected.
PoroTomo - Distributed Temperature Sensing (DTS) Measurements made in Brady Observation Well 56-1

Dataset Kratt, Christopher ; Coleman, Thomas I. ; Tyler, Scott W. ; ...

This submission is a follow-up to Distributed Temperature Sensing (DTS) measurements made in Brady observation well 56-1 during the PoroTomo field experiment conducted in March, 2016. The measurements in this data set were made on August 24, 2018 over an approximately 20 hour period. The fiber-optic cable extends to the bottom of the well at 367 m below the wellhead. Measurements were made with a Silixa XT DTS interrogator configured to continuously record in each file a sixty-second average of stokes and anti-stokes readings on a single channel with a bottom hole U-bend. The 2016 data were collected using amore »« less
Pressure-Temperature Simulation at Brady Hot Springs

Dataset Feigl, Kurt

These files contain the output of a model calculation to simulate the pressure and temperature of fluid at Brady Hot Springs, Nevada, USA. The calculation couples the hydrologic flow (Darcy's Law) with simple thermodynamics. The epoch of validity is 24 March 2015. Coordinates are UTM Easting, Northing, and Elevation in meters. Temperature is specified in degrees Celsius. Pressure is specified in Pascal.
Brady Geothermal Field Well Pumping Data During Deployment

Dataset Feigl, Kurt

Contains pumping data associated with the wells used in the 2016 Spring Campaign led partially by UW - Madison, LBNL, and LLNL scientists. The well coordinates and the depths to the pressure sensors used in the pumping wells can be found at the link "Coordinates and Sensor Depths" below.
Brady's Geothermal Field - Analysis of Pressure Data

Dataset Lim, David

*This submission provides corrections to GDR Submissions 844 and 845* Poroelastic Tomography (PoroTomo) by Adjoint Inverse Modeling of Data from Hydrology. The 3 *csv files containing pressure data are the corrected versions of the pressure dataset found in Submission 844. The dataset has been corrected in the sense that the atmospheric pressure has been subtracted from the total pressure measured in the well. Also, the transducers used at wells 56A-1 and SP-2 are sensitive to surface temperature fluctuations. These temperature effects have been removed from the corrected datasets. The 4th *csv file contains corrected version of the pumping data foundmore »« less

Similar Records