Pressure slip casting of silicon nitride
Conference
·
OSTI ID:99159
- Fraunhofer-Institut of Ceramic Technologies and Sintered Materials, Dresden (Germany)
This paper discusses the potential of pressure slip casting for components made of technical ceramic materials. The tests carried out on pressure slip casting and pressure filtration of silicon nitride show that the highest green density will be obtained if a slurry is used which is completely deflocculated and does not contain any binding agent. Penetration of fine particles into the porous plastic mould cannot be completely prevented but can be reduced to a large extent by the proper selection of the pressure-time regime.
- OSTI ID:
- 99159
- Report Number(s):
- CONF-940911-; TRN: 95:005310-0049
- Resource Relation:
- Conference: 5. international conference on ceramic processing science and technology, Friedrichshafen (Germany), 11-14 Sep 1994; Other Information: PBD: 1995; Related Information: Is Part Of Ceramic transactions: Ceramic processing science and technology. Volume 51; Hausner, H.; Messing, G.L.; Hirano, Shin-ichi [eds.]; PB: 835 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Slip casting and pressure slip casting of Si{sub 3}N{sub 4} aqueous suspensions
Fabrication of silicon nitride parts by slip casting
Slip casting and green body evaluation of 6% yttria, 2% alumina silicon nitride. Final report
Conference
·
Fri Sep 01 00:00:00 EDT 1995
·
OSTI ID:99159
+1 more
Fabrication of silicon nitride parts by slip casting
Conference
·
Fri Aug 01 00:00:00 EDT 1986
· Ceram. Eng. Sci. Proc.; (United States)
·
OSTI ID:99159
Slip casting and green body evaluation of 6% yttria, 2% alumina silicon nitride. Final report
Technical Report
·
Sun Dec 01 00:00:00 EST 1991
·
OSTI ID:99159