Angular distortion and through-thickness residual stress distribution in the friction-stir processed 6061-T6 aluminum alloy
- ORNL
- Los Alamos National Laboratory (LANL)
- University of Tennessee, Knoxville (UTK)
Residual stresses were measured through the thickness of friction-stir processed (FSP) 6061-T6 aluminum-alloy plates using neutron diffraction. Two different specimens were prepared to study the relationship between residual stress distributions through the thickness of the plate and angular distortion: (Case 1) a plate processed with both stirring pin and tool shoulder, i.e., a typical FSP plate subjected to both plastic deformation and frictional heat, and (Case 2) a plate processed only with the tool shoulder, i.e., subjected mainly to the frictional heating. The measured residual stress profiles show relatively small through-thickness residual stress variations in Case 1, while there is a significant through-thickness residual stress variations in Case 2. The main cause of the geometric angular distortion could be related to the non-uniform distribution of the frictional heat generated by the tool shoulder leading to the asymmetric distributions of the residual stress through the thickness of the FSP plate.
- Research Organization:
- Oak Ridge National Laboratory (ORNL); High Temperature Materials Laboratory
- Sponsoring Organization:
- EE USDOE - Office of Energy Efficiency and Renewable Energy (EE)
- DOE Contract Number:
- AC05-00OR22725
- OSTI ID:
- 989109
- Country of Publication:
- United States
- Language:
- English
Similar Records
Modeling of Residual Stresses and Property Distributions in Friction Stir Welds of Aluminum Alloy 6061-T6
Ultrafine grained structure and improved mechanical properties of low temperature friction stir spot welded 6061-T6 Al alloys