skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Microstructural Evolution of 7 wt.% Y2O3 ZrO2 Thermal Barrier Coatings due to Stress Relaxation at Elevated Temperatures and the Concomitant changes in Thermal Conductivity

Journal Article · · Surface and Coatings Technology

The purpose of this study was to evaluate the combined effect of stress and temperature on the microstructure of air plasma-sprayed 7 wt.% Y{sub 2}O{sub 3}-ZrO{sub 2} thermal barrier coatings, and relate microstructural changes to the thermal conductivity, k{sub th}. To simulate TBC service conditions, stand-alone tubes of YSZ were stress relaxed, starting from a compressive stress of 60 MPa, at temperatures of 1000 C or 1200 C. The duration of the stress relaxation test was either 5 min or 3 h. Detailed scanning electron microscopy (SEM) and Porod's specific surface area (SSA) analysis of small angle neutron scattering (SANS) results were used to determine which void systems, either interlamellar pores or intralamellar cracks, contributed to the observed relaxation of stress in the coatings. SEM investigations revealed closure of intralamellar cracks located perpendicular to the stress direction. For thinner YSZ coatings, SANS measurements indicated a statistically significant reduction in the total SSA and SSA associated with intralamellar cracks after stress relaxation at the times, temperatures, and stress investigated compared to those samples that were exposed to identical times and temperatures, but no stress. The SSA associated with the interlamellar pores was not significantly smaller in YSZ coatings stress relaxed from 60 MPa at 1200 C for 3 h compared to as-sprayed coatings. The thermal conductivity of the coatings was strongly influenced by stress, with increases in kth observed after only 5 min at 60 MPa and 1200 C. Reductions in the total SSA were directly linked to increases in k{sub th}.

Research Organization:
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). High Temperature Materials Lab. (HTML)
Sponsoring Organization:
USDOE Office of Energy Efficiency and Renewable Energy (EERE)
DOE Contract Number:
DE-AC05-00OR22725
OSTI ID:
988754
Journal Information:
Surface and Coatings Technology, Vol. 205, Issue 1; ISSN 0257-8972
Country of Publication:
United States
Language:
English

Similar Records

Effect of Initial Powder Morphology and Thermal and Mechanical Properties of Stand-Alone Plasma-Sprayed 7 wt%Y2O3-ZrO2 Coatings
Journal Article · Sun Jan 01 00:00:00 EST 2006 · Materials Science and Engineering A · OSTI ID:988754

Cost-Reducing Methods for Thin Film Solid Oxide Fuel Cells
Journal Article · Wed Aug 10 00:00:00 EDT 2005 · Materials Research Society Bulletin · OSTI ID:988754

In-Flight Alloying of Nanocrystalline Yttria-Stabilized Zirconia Using Suspension spray to Produce Ultra-Low Thermal Conductivity Thermal Barriers
Journal Article · Sat Jan 01 00:00:00 EST 2011 · International Journal of Applied Ceramic Technology · OSTI ID:988754