Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Orthotropic deflection model for corner-supported plates with segmented in-plane actuators.

Conference ·
OSTI ID:988511
The shape control of thin, flexible structures has been studied primarily for edge-supported thin plates. For applications involving reconfigurable apertures such as membrane optics and active RF surfaces, corner-supported configurations may prove more applicable. Corner-supported adaptive structures allow for parabolic geometries, greater flexibility, and larger achievable deflections when compared to edge-supported geometries under similar actuation conditions. Preliminary models have been developed for corner-supported thin plates actuated by isotropic piezoelectric actuators. However, typical piezoelectric materials are known to be orthotropic. This paper extends a previously-developed isotropic model for a corner-supported, thin, rectangular bimorph to a more general orthotropic model for a bimorph actuated by a two-dimensional array of segmented PVDF laminates. First, a model determining the deflected shape of an orthotropic laminate for a given distribution of voltages over the actuator array is derived. Second, symmetric actuation of a bimorph consisting of orthotropic material is simulated using orthogonally-oriented laminae. Finally, the results of the model are shown to agree well with layered-shell finite element simulations for simple and complex voltage distributions.
Research Organization:
Sandia National Laboratories
Sponsoring Organization:
USDOE
DOE Contract Number:
AC04-94AL85000
OSTI ID:
988511
Report Number(s):
SAND2005-0836C
Country of Publication:
United States
Language:
English

Similar Records

Hysteresis-free high-temperature precise bimorph actuators produced by direct bonding of lithium niobate wafers
Journal Article · Sun Feb 01 23:00:00 EST 2015 · Applied Physics Letters · OSTI ID:22420272

Large reference displacement analysis of composite plates. [Dynamics of layers of orthotropic laminae]
Thesis/Dissertation · Mon Dec 31 23:00:00 EST 1990 · OSTI ID:7201567

Thermal shock of orthotropic rectangular plates
Journal Article · Sat Dec 31 23:00:00 EST 1988 · Journal of Thermal Stresses; (USA) · OSTI ID:7005886