Mechanical properties of thermally aged cast stainless steels from shippingport reactor components.
Thermal embrittlement of static-cast CF-8 stainless steel components from the decommissioned Shippingport reactor has been characterized. Cast stainless steel materials were obtained from four cold-leg check valves, three hot-leg main shutoff valves, and two pump volutes. The actual time-at-temperature for the materials was {approx}13 y at {approx}281 C (538 F) for the hot-leg components and {approx}264 C (507 F) for the cold-leg components. Baseline mechanical properties for as-cast material were determined from tests on either recovery-annealed material, i.e., annealed for 1 h at 550 C and then water quenched, or material from the cooler region of the component. The Shippingport materials show modest decreases in fracture toughness and Charpy-impact properties and a small increase in tensile strength because of relatively low service temperatures and ferrite content of the steel. The procedure and correlations developed at Argonne National Laboratory for estimating mechanical properties of cast stainless steels predict accurate or slightly lower values for Charpy-impact energy, tensile flow stress, fracture toughness J-R curve, and JIC of the materials. The kinetics of thermal embrittlement and degree of embrittlement at saturation, i.e., the minimum impact energy achieved after long-term aging, were established from materials that were aged further in the laboratory. The results were consistent with the estimates. The correlations successfully predicted the mechanical properties of the Ringhals 2 reactor hot- and crossover-leg elbows (CF-8M steel) after service of {approx}15 y and the KRB reactor pump cover plate (CF-8) after {approx}8 y of service.
- Research Organization:
- Argonne National Laboratory (ANL)
- Sponsoring Organization:
- USDOE; NRC
- DOE Contract Number:
- AC02-06CH11357
- OSTI ID:
- 985104
- Report Number(s):
- ANL-94/37
- Country of Publication:
- United States
- Language:
- ENGLISH
Similar Records
Mechanical properties of thermally aged cast stainless steels from Shippingport reactor components
Evaluation of aging degradation of structural components
Evaluation of aging degradation of structural components
Technical Report
·
Fri Mar 31 23:00:00 EST 1995
·
OSTI ID:71383
Evaluation of aging degradation of structural components
Conference
·
Sat Feb 29 23:00:00 EST 1992
·
OSTI ID:10154053
Evaluation of aging degradation of structural components
Conference
·
Sat Feb 29 23:00:00 EST 1992
·
OSTI ID:5177855
Related Subjects
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS
36 MATERIALS SCIENCE
AGING
ANL
EMBRITTLEMENT
FERRITE
FLOW STRESS
FRACTURE PROPERTIES
HEAT EXCHANGERS
KINETICS
MECHANICAL PROPERTIES
PLATES
RINGHALS-2 REACTOR
RWE-BAYERNWERK REACTOR
SATURATION
SHIPPINGPORT REACTOR
STAINLESS STEELS
TENSILE PROPERTIES
VALVES
WATER
36 MATERIALS SCIENCE
AGING
ANL
EMBRITTLEMENT
FERRITE
FLOW STRESS
FRACTURE PROPERTIES
HEAT EXCHANGERS
KINETICS
MECHANICAL PROPERTIES
PLATES
RINGHALS-2 REACTOR
RWE-BAYERNWERK REACTOR
SATURATION
SHIPPINGPORT REACTOR
STAINLESS STEELS
TENSILE PROPERTIES
VALVES
WATER