Flowability parameters for chopped switchgrass, wheat straw and corn stover

Journal Article · Sun Feb 01 04:00:00 EST 2009 · Powder Technology

DOI:https://doi.org/10.1016/j.powtec.2009.02.009· OSTI ID:984793

Chevanan, Nehru ^[1]; Womac, A R ^[1]; Bitra, V S.P. ^[1]; Yoder, D C ^[1]; Sokhansanj, Shahabaddine ^[2]

---

1. University of Tennessee
2. ORNL

A direct shear cell to measure the shear strength and flow properties of chopped switchgrass, wheat straw, and corn stover was designed, fabricated, and tested. Yield loci (r2=0.99) determined at pre-consolidation pressures of 3.80 kPa and 5.02 kPa indicated that chopped biomass followed Mohr-Coulomb failure. Normal stress significantly affected the displacement required for shear failure, as well as the friction coefficient values for all three chopped biomass types. Displacement at shear failure ranged from 30 to 80 mm, and depended on pre-consolidation pressure, normal stress, and particle size. Friction coefficient was inversely related to normal stress, and was highest for chopped corn stover. Also, chopped corn stover exhibited the highest angle of internal friction, unconfined yield strength, major consolidation strength, and cohesive strength, all of which indicated increased challenges in handling chopped corn stover. The measured angle of internal friction and cohesive strength indicated that chopped biomass cannot be handled by gravity alone. The measured angle of internal friction and cohesive strength were 43 and 0.75 kPa for chopped switchgrass; 44 and 0.49 kPa for chopped wheat straw; and 48 and 0.82 kPa for chopped corn stover. Unconfined yield strength and major consolidation strength used for characterization of bulk flow materials and design of hopper dimensions were 3.4 and 10.4 kPa for chopped switchgrass; 2.3 and 9.6 kPa for chopped wheat straw and 4.2 and 11.8 kPa for chopped corn stover. These results are useful for development of efficient handling, storage, and transportation systems for biomass in biorefineries.

• Research Organization: Oak Ridge National Laboratory (ORNL)
• Sponsoring Organization: EE USDOE - Office of Energy Efficiency and Renewable Energy (EE)
• DOE Contract Number: AC05-00OR22725
• OSTI ID: 984793
• Journal Information: Powder Technology, Journal Name: Powder Technology Journal Issue: (2009) Vol. 193; ISSN 0032-5910
• Country of Publication: United States
• Language: English

Related Subjects

09 BIOMASS FUELS
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION
36 MATERIALS SCIENCE
AGRICULTURAL WASTES
BIOMASS
Chopped biomass
DESIGN
DIMENSIONS
FRICTION
HOPPERS
INTERNAL FRICTION
MAIZE
PARTICLE SIZE
SHEAR
SHEAR PROPERTIES
STORAGE
STRAW
TRANSPORTATION SYSTEMS
WHEAT
YIELD STRENGTH
angle of internal friction
cohesion
direct shear
flowability