Skip to main content
OSTI.GOVU.S. Department of Energy Office of Scientific and Technical Information
U.S. Department of Energy
Office of Scientific and Technical Information
 

Nuclear forensics techniques for attributing material used in a radiological dispersal device event

Conference ·
OSTI ID:977703
 [1];  [2];  [3];  [4];  [5];  [6];  [7]
  1. Paula L.
  2. Erika Arendt
  3. Jessica L.
  4. Mark R.
  5. Kristen
  6. Don
  7. William S.
+ Show Author Affiliations
If a radiological dispersal device (RDD) is detonated in the U.S. or near U.S. interests overseas, it will be crucial that the actors involved in the event can be identified quickly. Law enforcement officials will need information concerning the material used in the device, specifically what type of material it was and from where it originated. This information will then be used to help identify the specific individuals who manufactured the device and perpetrated the event. Texas A&M University and Los Alamos National Laboratory are collaborating on the development of a technique for identifying the material used in a radiological dispersal device. This methodology is currently focused on radiological dispersal devices that make use of spent nuclear fuel as the source material. The methodology developed makes use of both a forward model and an inverse model to identify specific spent fuel characteristics using isotopic composition of RDD debris. The forward model is based on sophisticated reactor physics calculations for the prediction of spent fuel isotopic compositions as a function of fuel type (e.g., PWR, BWR, CANDU, RBMK, etc.), fuel burnup (in MWd/MTHM), fuel age (in years since permanent discharge from the reactor), and operating characteristics (e.g., operating power level, time at power, etc.). These reactor physics calculations are benchmarked to measured data to establish their accuracy in predicting isotopic compositions. The inverse model makes use of a Bayesian inverse method to identify the specific spent fuel assembly (or assemblies) used based on measurements of actinide and fission product isotopic ratios in the RDD debris. A description of both the forward and inverse models, accuracies of the technique, and the results to date are given.
Research Organization:
Los Alamos National Laboratory
Sponsoring Organization:
DOE
OSTI ID:
977703
Report Number(s):
LA-UR-04-4278
Country of Publication:
United States
Language:
English

Similar Records

Nuclear Forensics Attributing the Source of Spent Fuel Used in an RDD Event
Thesis/Dissertation · Sun May 01 00:00:00 EDT 2005 · OSTI ID:876516
REACTOR PHYSICS MODELING OF SPENT RESEARCH REACTOR FUEL FOR TECHNICAL NUCLEAR FORENSICS
Conference · Mon Jul 18 00:00:00 EDT 2011 · OSTI ID:1016389
International Data on Radiological Sources
Conference · Wed Jun 30 20:00:00 EDT 2010 · OSTI ID:989885

Related Subjects

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS
ACCURACY
ACTINIDES
BURNUP
ENFORCEMENT
FISSION PRODUCTS
FORECASTING
LANL
NUCLEAR FUELS
REACTOR PHYSICS
SPENT FUELS