Optimization of chemical etching process in niobium cavities
- Tsuyoshi
Superconducting niobium cavities are important components of linear accelerators. Buffered chemical polishing (BCP) on the inner surface of the cavity is a standard procedure to improve its performance. The quality of BCP, however, has not been optimized well in terms of the uniformity of surface smoothness. A finite element computational fluid dynamics (CFD) model was developed to simulate the chemical etching process inside the cavity. The analysis confirmed the observation of other researchers that the iris section of the cavity received more etching than the equator regions due to higher flow rate. The baffle, which directs flow towards the walls of the cavity, was redesigned using optimization techniques. The redesigned baffle significantly improves the performance of the etching process. To verify these results an experimental setup for flow visualization was created. The setup consists of a high speed, high resolution CCD camera. The camera is positioned by a computer-controlled traversing mechanism. A dye injecting arrangement is used for tracking the fluid path. Experimental results are in general agreement with CFD and optimization results.
- Research Organization:
- Los Alamos National Laboratory
- Sponsoring Organization:
- DOE
- OSTI ID:
- 977487
- Report Number(s):
- LA-UR-04-1191
- Country of Publication:
- United States
- Language:
- English
Similar Records
Genesis of topography in buffered chemical polishing of niobium for application to superconducting radiofrequency accelerator cavities
Surface polishing of niobium for superconducting radio frequency (SRF) cavity applications