Comparison of Three Primary Surface Recuperator Alloys

Journal Article · Fri Jan 01 04:00:00 EST 2010 · Journal of Engineering for Gas Turbines & Power

DOI:https://doi.org/10.1115/1.3157094· OSTI ID:973543

Matthews, Wendy ^[1]; More, Karren Leslie ^[2]; Walker, Larry R ^[2]

---

1. Capstone Turbines
2. ORNL

Extensive work performed by Capstone Turbine Corporation, Oak Ridge National Laboratory, and various others has shown that the traditional primary surface recuperator alloy, type 347 stainless steel, is unsuitable for applications above 650 C ({approx}1200 F). Numerous studies have shown that the presence of water vapor greatly accelerates the oxidation rate of type 347 stainless steel at temperatures above 650 C ({approx}1200 F). Water vapor is present as a product of combustion in the microturbine exhaust, making it necessary to find replacement alloys for type 347 stainless steel that will meet the long life requirements of microturbine primary surface recuperators. It has been well established over the past few years that alloys with higher chromium and nickel contents than type 347 stainless steel have much greater oxidation resistance in the microturbine environment. One such alloy that has replaced type 347 stainless steel in primary surface recuperators is Haynes Alloy HR-120 (Haynes and HR-120 are trademarks of Haynes International, Inc.), a solid-solution-strengthened alloy with nominally 33 wt % Fe, 37 wt % Ni and 25 wt % Cr. Unfortunately, while HR-120 is significantly more oxidation resistant in the microturbine environment, it is also a much more expensive alloy. In the interest of cost reduction, other candidate primary surface recuperator alloys are being investigated as possible alternatives to type 347 stainless steel. An initial rainbow recuperator test has been performed at Capstone to compare the oxidation resistance of type 347 stainless steel, HR-120, and the Allegheny Ludlum austenitic alloy AL 20-25+Nb (AL 20-25+Nb is a trademark of ATI Properties, Inc. and is licensed to Allegheny Ludlum Corporation). Evaluation of surface oxide scale formation and associated alloy depletion and other compositional changes has been carried out at Oak Ridge National Laboratory. The results of this initial rainbow test will be presented and discussed in this paper.

• Research Organization: Oak Ridge National Laboratory (ORNL); High Temperature Materials Laboratory
• Sponsoring Organization: EE USDOE - Office of Energy Efficiency and Renewable Energy (EE)
• DOE Contract Number: AC05-00OR22725
• OSTI ID: 973543
• Journal Information: Journal of Engineering for Gas Turbines & Power, Journal Name: Journal of Engineering for Gas Turbines & Power Journal Issue: 2 Vol. 132; ISSN JETPEZ; ISSN 0742-4795
• Country of Publication: United States
• Language: English

Related Subjects

36 MATERIALS SCIENCE
ALLOYS
CHROMIUM
COMBUSTION
EVALUATION
HAYNES ALLOYS
NICKEL
ORNL
OXIDATION
OXIDES
STAINLESS STEELS
TURBINES
WATER VAPOR