A Mock UF6 Feed and Withdrawal System for Testing Safeguards Monitoring Systems and Strategies Intended for Nuclear Fuel Enrichment and Processing Plants
- ORNL
This report describes an engineering-scale, mock UF6 feed and withdrawal (F&W) system, its operation, and its intended uses. This system has been assembled to provide a test bed for evaluating and demonstrating new methodologies that can be used in remote, unattended, continuous monitoring of nuclear material process operations. These measures are being investigated to provide independent inspectors improved assurance that operations are being conducted within declared parameters, and to increase the overall effectiveness of safeguarding nuclear material. Testing applicable technologies on a mock F&W system, which uses water as a surrogate for UF6, enables thorough and cost-effective investigation of hardware, software, and operational strategies before their direct installation in an industrial nuclear material processing environment. Electronic scales used for continuous load-cell monitoring also are described as part of the basic mock F&W system description. Continuous monitoring components on the mock F&W system are linked to a data aggregation computer by a local network, which also is depicted. Data collection and storage systems are described only briefly in this report. The mock UF{sub 6} F&W system is economical to operate. It uses a simple process involving only a surge tank between feed tanks and product and withdrawal (or waste) tanks. The system uses water as the transfer fluid, thereby avoiding the use of hazardous UF{sub 6}. The system is not tethered to an operating industrial process involving nuclear materials, thereby allowing scenarios (e.g., material diversion) that cannot be conducted otherwise. These features facilitate conducting experiments that yield meaningful results with a minimum of expenditure and quick turnaround time. Technologies demonstrated on the engineering-scale system lead to field trials (described briefly in this report) for determining implementation issues and performance of the monitoring technologies under plant operating conditions. The ultimate use of technologies tested on the engineering-scale test bed is to work with safeguards agencies to install them in operating plants (e.g., enrichment and fuel processing plants), thereby promoting new safeguards measures with minimal impact to operating plants. In addition, this system is useful in identifying features for new plants that can be incorporated as part of 'safeguards by design,' in which load cells and other monitoring technologies are specified to provide outputs for automated monitoring and inspector evaluation.
- Research Organization:
- Oak Ridge National Laboratory (ORNL)
- Sponsoring Organization:
- NNSA USDOE - National Nuclear Security Administration (NNSA)
- DOE Contract Number:
- AC05-00OR22725
- OSTI ID:
- 970911
- Report Number(s):
- ORNL/TM-2009/229; NN4003010; MDGA517
- Country of Publication:
- United States
- Language:
- English
Similar Records
Integrating UF6 Cylinder RF Tracking With Continuous Load Cell Monitoring for Verifying Declared UF6 Feed and Withdrawal Operations Verifying Declared UF6 Feed and Withdrawal Operations
Results of Inspections of Operation of the ORNL Mock Feed/Withdrawal System
Developing Load Cell Monitoring on the Mock UF6 Feed and Withdrawal System
Conference
·
Wed Dec 31 23:00:00 EST 2008
·
OSTI ID:958997
Results of Inspections of Operation of the ORNL Mock Feed/Withdrawal System
Conference
·
Thu Dec 31 23:00:00 EST 2009
·
OSTI ID:982130
Developing Load Cell Monitoring on the Mock UF6 Feed and Withdrawal System
Technical Report
·
Thu Jan 31 23:00:00 EST 2013
·
OSTI ID:1089771