CO2 laser welding fused silica.
The feasibility of laser welding of fused silica (aka quartz) has been demonstrated recently by others. An application requiring hermetic sealing of a thin, pressure-bearing quartz diaphragm to a thicker frame led us to explore this technique. We found that laser welding techniques normally used for metallic parts caused scorching and uneven melting. Contrary to standard practices (near focus, high travel speed, high power density), successful welds in fused silica required a broad heat source applied over a large area under a slow rotation to gradually heat the glass through the annealing, softening and finally working temperatures. Furthermore, good mechanical contact between the parts to be joined played an even more important role in this process than in typical metallic joints. A 50 W CO2 laser with 4 f.l. ZnSe2 lens and rotary head was used to weld 0.425 OD, 0.006-0.010 thick, disks to 0.500 OD tubing with 0.125 walls. Several joint geometries and beam orientations were investigated. Temperature profiles were measured and compared to an FEM thermal model. We will discuss the effects of laser power, travel speed, number of passes, joint geometry and part thicknesses on achieving hermeticity and cosmetically-acceptable joints.
- Research Organization:
- Sandia National Laboratories
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 970196
- Report Number(s):
- SAND2005-5056C
- Country of Publication:
- United States
- Language:
- English
Similar Records
Shock-wave equation-of-state measurements in fused silica up to 1600 GPa
High speed butt joining of 1” thick 2139-T8