Tensile creep and stress-rupture behavior of polymer derived SiC fibers
- NASA Lewis Research Center, Cleveland, OH (United States)
Tensile creep and stress-rupture studies were conducted on polymer derived Nicalon, Hi-Nicalon, and SiC/BN-coated Nicalon SiC fibers. Test conditions were temperatures from 1200 to 1400{degrees}C, stresses from 100 to 1600 MPa, stress application times up to 200 hours, and air, argon, and vacuum test environments. For all fibers, creep occurred predominantly in the primary stage. Hi-Nicalon had much higher 0.2 and 1% creep strengths than as-produced as well as coated Nicalon fibers. The stress-rupture strength of Hi-Nicalon up to 100 hours was also higher than that of the coated and as-produced Nicalon fibers. SiC/BN coating on Nicalon increased only the short-term low-temperature rupture strength. Limited testing in argon and vacuum suggests that for all fiber types, creep and rupture resistances are reduced in comparison to the results in air. Possible mechanisms for the observed behavior are discussed.
- OSTI ID:
- 96522
- Report Number(s):
- CONF-940416--
- Country of Publication:
- United States
- Language:
- English
Similar Records
Effects of thermal treatment on tensile creep and stress-rupture behavior of Hi-Nicalon SiC fibers
Environmental effects on creep and stress-rupture properties of advanced SiC fibers