Impedance Calculations for the NSLS-II Storage Rings
Impedance of two vacuum chamber components, Bellows and BPM, is considered in some detail. In order to avoid generation of Higher-Order Modes (HOM's) in the NSLS-II bellows, we designed a new low-impedance RF shielding consisting of 6 wide and 2 narrow metal plates without opening slots between them. The short-range wakepotential has been optimized taking into account vertical offset of RF fingers from their nominal position. The results were compared with data of bellows designed at other laboratories. Narrow-band impedance of the BPM Button has been studied. TE-modes in the BPM button were suppressed by a factor of 8 by modification of existing housings. Two new types of housings are shown. The total impedance of the NSLS-II storage ring is discussed in terms of the loss factor and the vertical kick factor for a 3mm-Gaussian bunch.
- Research Organization:
- Brookhaven National Laboratory
- Sponsoring Organization:
- Doe - Office Of Science
- DOE Contract Number:
- AC02-98CH10886
- OSTI ID:
- 958704
- Report Number(s):
- BNL--82315-2009-CP; 39KC02000
- Country of Publication:
- United States
- Language:
- English
Similar Records
COUPLING IMPEDANCE OF CESR-B RF CAVITY FOR THE NSLS-II STORAGE RING.
Rogue Mode Shileding in NSLS-II Multipole Vacuum Chambers