Stress and Strain Partitioning of Ferrite and Martensite during Deformation
The direct measurement of the stress or strain partitioning during deformation in the materials, consisting of two phases with the same crystallographic structure and different microstructures, is still difficult so far. This is due to the fact that no effective characterization tool is available with the ability to distinguish the local strain and stress at micro-scale level. In this paper, we studied the micromechanical behavior of ferrite/martensite dual phase alloys using the in-situ high-energy X-ray diffraction technique. We established a new method to separate the stress and strain in the ferrite and martensite during loading. Although the ferrite and martensite exhibit the same crystal structure with similar lattice parameters, the dependence of (200) lattice strains on the applied stress is obviously different for each phase. A Visco-Plastic Self-Consistent model, which can simulate the micromechanical behavior of two-phase materials, was used to construct the respective constitutive laws for both phases from the experimental lattice strains and to fit the macrostress-strain curve. The material parameters for each phase extracted from our experiments and simulations could be used for designing other dual phase alloys and optimizing some complex industrial processes.
- Research Organization:
- Pacific Northwest National Lab. (PNNL), Richland, WA (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC05-76RL01830
- OSTI ID:
- 956893
- Report Number(s):
- PNNL-SA-65081; MMTAEB; VT0505000; TRN: US201007%%95
- Journal Information:
- Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 40A(6):1383-1387, Vol. 40, Issue 6; ISSN 1073-5623
- Country of Publication:
- United States
- Language:
- English
Similar Records
The influence of martensite shape, concentration, and phase transformation strain on the deformation behavior of stable dual-phase steels
Load partitioning between ferrite/martensite and dispersed nanoparticles of a 9Cr ferritic/martensitic (F/M) ODS steel at high temperatures