Optimizing stability, transport, and divertor operation through plasma shaping for steady-state scenario development in DIII-D
Journal Article
·
· Physics of Plasmas
OSTI ID:953719
Recent studies on the DIII-D tokamak [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] have elucidated key aspects of the dependence of stability, confinement, and density control on the plasma magnetic configuration, leading to the demonstration of nearly noninductive operation for >1 s with pressure 30% above the ideal no-wall stability limit. Achieving fully noninductive tokamak operation requires high pressure, good confinement, and density control through divertor pumping. Plasma geometry affects all of these. Ideal magnetohydrodynamics modeling of external kink stability suggests that it may be optimized by adjusting the shape parameter known as squareness ({zeta}). Optimizing kink stability leads to an increase in the maximum stable pressure. Experiments confirm that stability varies strongly with {zeta}, in agreement with the modeling. Optimization of kink stability via {zeta} is concurrent with an increase in the H-mode edge pressure pedestal stability. Global energy confinement is optimized at the lowest {zeta} tested, with increased pedestal pressure and lower core transport. Adjusting the magnetic divertor balance about a double-null configuration optimizes density control for improved noninductive auxiliary current drive. The best density control is obtained with a slight imbalance toward the divertor opposite the ion grad(B) drift direction, consistent with modeling of these effects. These optimizations have been combined to achieve noninductive current fractions near unity for over 1 s with normalized pressure of 3.5<{beta}{sub N}<3.9, bootstrap current fraction of >65%, and a normalized confinement factor of H{sub 98(y,2)}{approx}1.5.
- Research Organization:
- Lawrence Livermore National Laboratory (LLNL), Livermore, CA
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 953719
- Report Number(s):
- LLNL-JRNL-409682
- Journal Information:
- Physics of Plasmas, Journal Name: Physics of Plasmas Journal Issue: 5 Vol. 16; ISSN PHPAEN; ISSN 1070-664X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Optimizing stability, transport, and divertor operation through plasma shaping for steady-state scenario development in DIII-D
Primary Edge Localized Mode Filament Structure in the National Spherical Torus Experiment
Optimizing stability, transport, and divertor operation through plasma shaping for steady-state scenario development in DIII-D
Journal Article
·
Fri May 15 00:00:00 EDT 2009
· Physics of Plasmas
·
OSTI ID:21277167
Primary Edge Localized Mode Filament Structure in the National Spherical Torus Experiment
Conference
·
Wed Dec 31 23:00:00 EST 2008
·
OSTI ID:1022017
Optimizing stability, transport, and divertor operation through plasma shaping for steady-state scenario development in DIII-D
Conference
·
Wed Dec 31 23:00:00 EST 2008
·
OSTI ID:1022016