Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Separate effects testing and analyses to investigate liner tearing of the 1:6-scale reinforced concrete containment building

Technical Report ·
DOI:https://doi.org/10.2172/95192· OSTI ID:95192
; ;  [1]
  1. Sandia National Labs., Albuquerque, NM (United States); and others

The overpressurization of a 1:6-scale reinforced concrete containment building demonstrated that liner tearing is a plausible failure mode in such structures under severe accident conditions. A combined experimental and analytical program was developed to determine the important parameters which affect liner tearing and to develop reasonably simple analytical methods for predicting when tearing will occur. Three sets of test specimens were designed to allow individual control over and investigation of the mechanisms believed to be important in causing failure of the liner plate. The series of tests investigated the effect on liner tearing produced by the anchorage system, the loading conditions, and the transition in thickness from the liner to the insert plate. Before testing, the specimens were analyzed using two- and three-dimensional finite element models. Based on the analysis, the failure mode and corresponding load conditions were predicted for each specimen. Test data and post-test examination of test specimens show mixed agreement with the analytical predictions with regard to failure mode and specimen response for most tests. Many similarities were also observed between the response of the liner in the 1:6-scale reinforced concrete containment model and the response of the test specimens. This work illustrates the fact that the failure mechanism of a reinforced concrete containment building can be greatly influenced by details of liner and anchorage system design. Further, it significantly increases the understanding of containment building response under severe conditions.

Research Organization:
Nuclear Regulatory Commission, Washington, DC (United States). Div. of Engineering Technology; Sandia National Labs., Albuquerque, NM (United States)
Sponsoring Organization:
Nuclear Regulatory Commission, Washington, DC (United States)
DOE Contract Number:
AC04-94AL85000
OSTI ID:
95192
Report Number(s):
NUREG/CR--6184; SAND--92-1720; ON: TI95014950
Country of Publication:
United States
Language:
English