A wet chemistry approach to sub-micron, removable flip chip interconnects.
Higher performance is the main driver in the integrated circuit (IC) market, but along with added function comes the cost of increased input/output connections and larger die sizes. Space saving approaches aimed at solving these challenges includes two technologies; 3D stacking (3D-ICs) and flip chip assemblies. Emerging ICs require sub-micron scale interconnects which include vias for 3D-ICs and bump bonds for flip chips. Photolithographic techniques are commonly used to prepare templates followed by metal vapor deposition to create flip chip bump bonds. Both the lithography step and the metal properties required for bump bonding contribute to limiting this approach to a minimum bump size of -10 ?m. Here, we present a wet chemistry approach to fabricating uniform bump bonds of tunable size and height down to the nanoscale. Nanosphere lithography (NSL), a soft lithographic technique, is used to create a bump bond template or mask for nanoscale bumps. Electrochemical deposition is also used through photoresist templates to create uniform bump bonds across large area wafers or dies. This template approach affords bumps with tunable diameters from 100s of nanometers to microns (allowing for tunable interconnect pitch and via diameters) while the use of constant current electroplating gives uniform bump height over large areas (>1 cm{sup 2}).
- Research Organization:
- Sandia National Laboratories
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 950941
- Report Number(s):
- SAND2008-5081C
- Country of Publication:
- United States
- Language:
- English
Similar Records
Solder bump height dependence of Josephson chip-to-card interconnection inductance using flip-chip bonding technique
On-PIC Light Source Integration & Micro-dispensing of Solder Paste for Flip Chip Application