Migration of Artificially Introduced Micron Size Carbon Dust in the DIII-D Divertor
Migration of pre-characterized carbon dust in a tokamak environment was studied by introducing about 30 milligrams of dust flakes 5-10 {micro}m in diameter in the lower divertor of DIII-D using the DiMES sample holder. The dust was exposed to high power ELMing Hmode discharges in lower-single-null magnetic configuration with the strike points swept across the divertor floor. When the outer strike point (OSP) passed over the dust holder exposing it to high particle and heat fluxes, part of the dust was injected into the plasma. In about 0.1 sec following the OSP pass over the dust, 1-2% of the total dust carbon content (2-4 x 10{sup 19} carbon atoms, equivalent to a few million dust particles) penetrated the core plasma, raising the core carbon density by a factor of 2-3. When the OSP was inboard of the dust holder, the dust injection continued at a lower rate. Individual dust particles were observed moving at velocities of 10-100 m/s, predominantly in the toroidal direction for deuteron flow to the outer divertor target, consistent with the ion drag force. The observed behavior of the dust is in qualitative agreement with modeling by the 3D DustT code.
- Research Organization:
- Lawrence Livermore National Laboratory (LLNL), Livermore, CA
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 940152
- Report Number(s):
- UCRL-JRNL-221419
- Journal Information:
- Journal of Nuclear Materials, Journal Name: Journal of Nuclear Materials Vol. 363-365; ISSN 0022-3115; ISSN JNUMAM
- Country of Publication:
- United States
- Language:
- English
Similar Records
Dust Studies in DIII-D and TEXTOR
Time-dependent modeling of dust outburst into tokamak divertor plasma