Fabrication and Test of TQS01 - a 90 mm Nb3Sn Quadrupole Magnet for LARP

Journal Article · Fri Jun 01 00:00:00 EDT 2007 · IEEE Transactions on Applied Superconductivity

OSTI ID:937507

Dietderich, D; Ferracin, P; Gourlay, S A; Hafalia, A R; Hannaford, R; Lietzke, A F; McInturff, A D; Sabbi, G L; Ghosh, A; Andreev, A N; Barzi, E; Bossert, R; Kashikhin, V V; Novitski, I; Whitson, G; Zlobin, A V; Caspi, S

In support of the development of a large-aperture Nb3Sn superconducting quadrupole for the Large Hadron Collider luminosity upgrade, two models (TQS and TQC) with a 90-mm aperture are being constructed at LBNL and FNAL within the framework of the US LHC Accelerator Research Program (LARP). These models use two identical Nb{sub 3}Sn coils but have different coil support structures. This paper describes the fabrication, assembly, cool-down and test of TQS01--a model based on key and bladder technology with supporting iron yoke and an aluminum shell. Comparison of the test measurements with design expectations is also reported.

• Research Organization: Ernest Orlando Lawrence Berkeley National Laboratory, Berkeley, CA (US)
• Sponsoring Organization: Accelerator& Fusion Research Division
• DOE Contract Number: AC02-05CH11231
• OSTI ID: 937507
• Report Number(s): LBNL-980E
• Journal Information: IEEE Transactions on Applied Superconductivity, Journal Name: IEEE Transactions on Applied Superconductivity Journal Issue: 2 Vol. 17
• Country of Publication: United States
• Language: English

Related Subjects

43 PARTICLE ACCELERATORS
75 CONDENSED MATTER PHYSICS
SUPERCONDUCTIVITY AND SUPERFLUIDITY
ACCELERATORS
ALUMINIUM
APERTURES
BLADDER
DESIGN
FABRICATION
HADRONS
IRON
LUMINOSITY
MAGNETS
QUADRUPOLES
RESEARCH PROGRAMS