Lattice Design of PEP-X as a Light Source Machine at SLAC
Conference
·
OSTI ID:934747
SLAC is studying an option of building a high brightness synchrotron light source machine, PEP-X, in the existing PEP-II tunnel [1]. The new machine will replace the PEPII High Energy Ring (HER) with the goal of achieving an ultra low emittance of {approx} 0.1 nm-rad at 4.5 GeV. The PEPX will utilize the same layout as in the PEP-II with 6 arcs and 6 long straight sections. The existing RF and injection systems will be re-used. The two HER FODO arcs will be replaced with the DBA arcs providing 30 dispersion free 4.26 m sections for magnetic undulators. The other four arcs will be replaced with the TME lattice for attaining the low emittance. Finally, a 89.3 m long damping wiggler with 10 cm period and 1.5 T maximum magnetic field will be installed in a long straight section to reduce the natural emittance to 0.094 nm-rad. The PEP-X dynamic aperture was studied and found sufficient for a vertical injection.
- Research Organization:
- Stanford Linear Accelerator Center (SLAC)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC02-76SF00515
- OSTI ID:
- 934747
- Report Number(s):
- SLAC-PUB-13286
- Country of Publication:
- United States
- Language:
- English
Similar Records
Reduction of Beam Emittance of Pep-X Using Quadruple Bend Achromat Cell
Lattice Development for Pep-X High Brightness Light Source
Lattice and Collective Effects for PEP-X
Conference
·
Tue May 26 00:00:00 EDT 2009
·
OSTI ID:953502
Lattice Development for Pep-X High Brightness Light Source
Conference
·
Wed Aug 25 00:00:00 EDT 2010
· Conf.Proc.C100523:WEPEA073,2010
·
OSTI ID:992975
Lattice and Collective Effects for PEP-X
Technical Report
·
Tue May 13 00:00:00 EDT 2008
·
OSTI ID:928362