Achievable magnetic fields of super-ferric helical undulators for the ILC.
The magnetic fields on the beam axis of helical undulators for the proposed International Linear Collider (ILC) gamma-ray production were calculated for undulator periods of 10 mm and 12 mm. The calculation assumed the use of low-carbon steel for the magnetic poles and a beam chamber outer diameter of 6.3 mm. Using NbTi superconducting coils at 4.2 K, the on-axis field for a 10-mm-period undulator was 0.62 T at the critical current density. The field for a 12-mm undulator period was 0.95 T, which gives a K value of 1.06. The K value for an 11-mm undulator with Nb{sub 3}Sn superconducting coils was estimated to about 1.1.
- Research Organization:
- Argonne National Laboratory (ANL)
- Sponsoring Organization:
- SC
- DOE Contract Number:
- AC02-06CH11357
- OSTI ID:
- 929218
- Report Number(s):
- ANL/APS/LS-311
- Country of Publication:
- United States
- Language:
- ENGLISH
Similar Records
Magnetic field analysis and achievable on-axis field for helical undulators.
Development of a model superconducting helical undulator for the ILC positron source.
Comparison of Achievable Magnetic Fields with Superconducting and Cryogenic Permanent Magnet Undulators – A Comprehensive Study of Computed and Measured Values
Journal Article
·
Mon Dec 31 23:00:00 EST 2007
· Nucl. Instrum. Methods Phys. Res. A
·
OSTI ID:969909
Development of a model superconducting helical undulator for the ILC positron source.
Conference
·
Mon Dec 31 23:00:00 EST 2007
·
OSTI ID:972579
Comparison of Achievable Magnetic Fields with Superconducting and Cryogenic Permanent Magnet Undulators – A Comprehensive Study of Computed and Measured Values
Technical Report
·
Sat Dec 31 23:00:00 EST 2016
·
OSTI ID:1372292