FILL STEM MANUFACTURING CHANGES AND PINCH WELD QUALIFICATIONS
In March of 2007 a document was issued, see attachment I, that defined the test protocol and required welding for the Kansas City Plant to change cutting oils from the recently approved 50:50 oil to an oil with similar characteristics but with different chemistry, additives, and possibly a different vendor due to plans by the current vendor to stop preparing the oils that are used in the KCP 50:50 mix. The KCP manufactured stems with the existing 50:50 oil blend in late FY07 and SRNL welded the stems and evaluated them in agreement with the test plan. This report provides all the data from these set-up and test welds. Set-up welds were shot and low and high voltages (currents) to ensure the window limits were applicable and then additional welds were made to validate the window. The purpose of this report is to ensure that the agreed upon path forward is still applicable.
- Research Organization:
- SRS
- Sponsoring Organization:
- DOE
- DOE Contract Number:
- AC09-96SR18500
- OSTI ID:
- 927165
- Report Number(s):
- WSRC-STI-2008-00098
- Country of Publication:
- United States
- Language:
- English
Similar Records
PINCH WELD TESTING TO SUPPORT CHANGE IN MANUFACTURING OIL AT THE KCP
OPTIMIZATION STUDY FOR FILL STEM MANUFACTURINGAND PINCH WELD PROCESSING
Effect of Scratches on Pinch Welds
Technical Report
·
Wed Feb 27 23:00:00 EST 2008
·
OSTI ID:927599
OPTIMIZATION STUDY FOR FILL STEM MANUFACTURINGAND PINCH WELD PROCESSING
Technical Report
·
Wed Sep 06 00:00:00 EDT 2006
·
OSTI ID:894728
Effect of Scratches on Pinch Welds
Technical Report
·
Tue Oct 11 00:00:00 EDT 2005
·
OSTI ID:890203