Update on use of mine pool water for power generation.

Technical Report · Sat Sep 30 04:00:00 EDT 2006

DOI:https://doi.org/10.2172/924684· OSTI ID:924684

Veil, J A; Puder, M G

In 2004, nearly 90 percent of the country's electricity was generated at power plants using steam-based systems (EIA 2005). Electricity generation at steam electric plants requires a cooling system to condense the steam. With the exception of a few plants using air-cooled condensers, most U.S. steam electric power plants use water for cooling. Water usage occurs through once-through cooling or as make-up water in a closed-cycle system (generally involving one or more cooling towers). According to a U.S. Geological Survey report, the steam electric power industry withdrew about 136 billion gallons per day of fresh water in 2000 (USGS 2005). This is almost the identical volume withdrawn for irrigation purposes. In addition to fresh water withdrawals, the steam electric power industry withdrew about 60 billion gallons per day of saline water. Many parts of the United States are facing fresh water shortages. Even areas that traditionally have had adequate water supplies are reaching capacity limits. New or expanded steam electric power plants frequently need to turn to non-traditional alternate sources of water for cooling. This report examines one type of alternate water source-groundwater collected in underground pools associated with coal mines (referred to as mine pool water in this report). In 2003, the U.S. Department of Energy's (DOE's) National Energy Technology Laboratory (NETL) funded Argonne National Laboratory (Argonne) to evaluate the feasibility of using mine pool water in Pennsylvania and West Virginia. That report (Veil et al. 2003) identified six small power plants in northeastern Pennsylvania (the Anthracite region) that had been using mine pool water for over a decade. It also reported on a pilot study underway at Exelon's Limerick Generating Station in southeastern Pennsylvania that involved release of water from a mine located about 70 miles upstream from the plant. The water flowed down the Schuylkill River and augmented the natural flow so that the Limerick plant could withdraw a larger volume of river water. The report also included a description of several other proposed facilities that were planning to use mine pool water. In early 2006, NETL directed Argonne to revisit the sites that had previously been using mine pool water and update the information offered in the previous report. This report describes the status of mine pool water use as of summer 2006. Information was collected by telephone interviews, electronic mail, literature review, and site visits.

• Research Organization: Argonne National Laboratory (ANL)
• Sponsoring Organization: USDOE; NETL
• DOE Contract Number: AC02-06CH11357
• OSTI ID: 924684
• Report Number(s): ANL/EVS/R-06/6
• Country of Publication: United States
• Language: ENGLISH

Related Subjects

01 COAL, LIGNITE, AND PEAT
29 ENERGY PLANNING, POLICY, AND ECONOMY
ANTHRACITE
CAPACITY
CLOSED-CYCLE SYSTEMS
COAL MINES
COOLING SYSTEMS
ELECTRIC POWER
ELECTRIC POWER INDUSTRY
ELECTRICITY
FRESH WATER
GEOLOGIC SURVEYS
IRRIGATION
PLANNING
POWER GENERATION
POWER PLANTS
SHORTAGES
STEAM
TELEPHONES
WATER USE