Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

In situ clay formation : evaluation of a proposed new technology for stable containment barriers.

Technical Report ·
DOI:https://doi.org/10.2172/918317· OSTI ID:918317

Containment of chemical wastes in near-surface and repository environments is accomplished by designing engineered barriers to fluid flow. Containment barrier technologies such as clay liners, soil/bentonite slurry walls, soil/plastic walls, artificially grouted sediments and soils, and colloidal gelling materials are intended to stop fluid transport and prevent plume migration. However, despite their effectiveness in the short-term, all of these barriers exhibit geochemical or geomechanical instability over the long-term resulting in degradation of the barrier and its ability to contain waste. No technologically practical or economically affordable technologies or methods exist at present for accomplishing total remediation, contaminant removal, or destruction-degradation in situ. A new type of containment barrier with a potentially broad range of environmental stability and longevity could result in significant cost-savings. This report documents a research program designed to establish the viability of a proposed new type of containment barrier derived from in situ precipitation of clays in the pore space of contaminated soils or sediments. The concept builds upon technologies that exist for colloidal or gel stabilization. Clays have the advantages of being geologically compatible with the near-surface environment and naturally sorptive for a range of contaminants, and further, the precipitation of clays could result in reduced permeability and hydraulic conductivity, and increased mechanical stability through cementation of soil particles. While limited success was achieved under certain controlled laboratory conditions, the results did not warrant continuation to the field stage for multiple reasons, and the research program was thus concluded with Phase 2.

Research Organization:
Sandia National Laboratories
Sponsoring Organization:
USDOE
DOE Contract Number:
AC04-94AL85000
OSTI ID:
918317
Report Number(s):
SAND2004-0414
Country of Publication:
United States
Language:
English

Similar Records

Seepage control in contaminated and permeable Houston clay: A laboratory study
Journal Article · · Hazardous Waste and Hazardous Materials; (United States) · OSTI ID:5641485

Modification of clay-based waste containment materials
Conference · Tue Dec 30 23:00:00 EST 1997 · OSTI ID:576625

Evaluation of clays and clay minerals for application to repository sealing
Technical Report · Fri Jul 01 00:00:00 EDT 1983 · OSTI ID:5849364