Reliability data to improve high magnetic field coil design for high velocity coilguns.
Coilguns have demonstrated their capability to launch projectiles to 1 km/s, and there is interest in their application for long-range precision strike weapons. However, the incorporation of cooling systems for repetitive operation will impact the mechanical design and response of the future coils. To assess the impact of such changes, an evaluation of the ruggedness and reliability of the existing 50 mm bore coil designed in 1993 was made by repeatedly testing at stress levels associated with operation in a coilgun. A two-coil testbed has been built with a static projectile where each coil is energized by its own capacitor bank. Simulation models of the applied forces generated in this testbed have been created with the SLINGSHOT circuit code to obtain loads equivalent to the worst-case anticipated in a 50 mm coilgun that could launch a 236 g projectile to 2 km/s. Bench measurements of the seven remaining coils built in 1993 have been used to evaluate which coils were viable for testing, and only one was found defective. Measurements of the gradient of the effective coil inductance in the presence of the projectile were compared to values from SLINGSHOT, and the agreement is excellent. Repeated testing of the HFC5 coil built in 1993 has demonstrated no failures after 205 shots, which is an order of magnitude greater than any number achieved in previous testing. Although this testing has only been done on two coils, the results are encouraging as it demonstrates there are no fundamental weak links in the design that will cause a very early failure. Several recommendations for future coil designs are suggested based on observations of this study.
- Research Organization:
- Sandia National Laboratories
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 918254
- Report Number(s):
- SAND2003-3458
- Country of Publication:
- United States
- Language:
- English
Similar Records
Design and performance of Sandia's contactless coilgun for 50 mm projectiles
Design and performance of Sandia`s contactless coilgun for 50 mm projectiles
Design and evaluation of coils for a 50 mm diameter induction coilgun launcher
Conference
·
Mon Dec 31 23:00:00 EST 1990
·
OSTI ID:5727571
Design and performance of Sandia`s contactless coilgun for 50 mm projectiles
Conference
·
Mon Dec 30 23:00:00 EST 1991
·
OSTI ID:10132499
Design and evaluation of coils for a 50 mm diameter induction coilgun launcher
Conference
·
Thu Dec 30 23:00:00 EST 1993
·
OSTI ID:10115215