A Multi-Layer Phoswich Radioxenon Detection System
Further work was performed in optical modeling of the modified (dual planar) XEPHWICH design. Modeling capabilities and understanding were expanded through the performance of three additional simulations. The efficiency of the entire optical modeling process was increased by developing custom software to interface with both the input and output of the simulation program. Work continues on the design and implementation of the analog portion of the read-out system. This component is being prototyped and is nearing completion. The PCB (printed circuit board) is in its design phase for the two-channel digital pulse processor, necessary for the dual planar XEPHWICH. System components are being selected for the signal processor based on a balance of cost and our expectations of quality. Outside the scope of the grant, but entirely related, we continue to work on developing a source of fission-product xenon gases that will be produced in the OSU TRIGA reactor. The amount of HEU necessary to provide the needed activities of xenon fission products, as well as build-in times for each isotope of importance following irradiation, have been calculated. Irradiation times in the TRIGA have been determined. We've finalized our design of the xenon-fission-product collection chamber and initiated in-house fabrication. PNNL will be supplying the thin foils of enriched uranium necessary for xenon production.
- Research Organization:
- Oregon State Univ., Corvallis, OR (United States)
- Sponsoring Organization:
- USDOE - National Nuclear Security Administration (NNSA)
- DOE Contract Number:
- FC52-06NA27322
- OSTI ID:
- 912522
- Report Number(s):
- 5th Quarter Report; TRN: US0806208
- Country of Publication:
- United States
- Language:
- English
Similar Records
A Multi-Layer Phoswich Radioxenon Detection System (7th Qtr Report), Reporting Period 10/01/07 - 12/31/07
A MULTI-LAYER PHOSWICH RADIOXENON DETECTION SYSTEM, REPORTING PERIOD 11/01/06 - 01/31/07