Neutronics and engineering design of the aqueous-slurry accelerator transmutation of waste blanket
- Los Alamos National Lab., NM (United States); and others
A conceptual target and blanket design for an accelerator transmutation of waste system capable of transmuting the high-level waste stream from 2.5 light water reactors is described. Typically, four such target-blanket designs would be served by a single linear accelerator. The target consists of rows of solid tungsten rod bundles, cooled by heavy water and surrounded by a lead annulus. The annular blanket, which surrounds the target, consists of a set of actinide-oxide-slurry-bearing tubes, each 3 m long, surrounded by heavy water moderator. Heat is removed from the slurry tubes by passing the slurry through an external heat exchanger. Long-lived fission products are burned in regions that are separate from the actinides. Using the Monte Carlo codes LAHET and MCNP, a conceptual design for a beam current of 62.5 mA/target of 1.6-GeV protons has been developed. Preliminary engineering analyses on key system components have been performed. A preliminary layout of the concept and the associated primary-heat transport subsystems was developed, demonstrating a multiple-containment-boundary design philosophy.
- OSTI ID:
- 89657
- Journal Information:
- Nuclear Technology, Journal Name: Nuclear Technology Journal Issue: 1 Vol. 111; ISSN 0029-5450; ISSN NUTYBB
- Country of Publication:
- United States
- Language:
- English
Similar Records
Parametric systems studies of the aqueous-based (slurry) blanket concept for accelerator transmutation of waste
Los Alamos aqueous target/blanket system design for the accelerator transmutation of waste concept
Related Subjects
22 GENERAL STUDIES OF NUCLEAR REACTORS
43 PARTICLE ACCELERATORS
ACCELERATOR FACILITIES
BREEDING BLANKETS
DESIGN
HIGH-LEVEL RADIOACTIVE WASTES
HYBRID SYSTEMS
NEUTRON SOURCES
ON-SITE POWER GENERATION
RADIOACTIVE WASTE FACILITIES
SLURRY REACTORS
SUBCRITICAL ASSEMBLIES
TRANSMUTATION
WATER COOLED REACTORS