The SLAC Vertical Comparator for the Calibration of Digital Levels
Journal Article
·
· Journal of Surveying Engineering
OSTI ID:896164
Digital levels replaced spirit levels in most fields of precise height measurements because of the automation of the height readings. Three manufacturers offer digital levels with a single reading resolution of 10 {micro}m, and for all of them systematic effects are known. In Europe several facilities for system calibration of digital levels using vertical comparators were established within the last decade. However, there still was no system calibration facility in North America. In order to guarantee the accuracy required for the alignment of experiments at the Stanford Linear Accelerator Center (SLAC) a calibration facility for the system calibration of digital levels was built. In this paper the setup of the SLAC vertical comparator is described in detail and its standard uncertainty is derived. In order to perform traditional rod calibration of conventional line-scaled rods, a CCD camera was integrated into the SLAC comparator. The CCD camera setup is also briefly described. To demonstrate the capabilities of the comparator, results of system and rod calibration are shown.
- Research Organization:
- Stanford Linear Accelerator Center (SLAC)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC02-76SF00515
- OSTI ID:
- 896164
- Report Number(s):
- SLAC-PUB-12207
- Journal Information:
- Journal of Surveying Engineering, Journal Name: Journal of Surveying Engineering
- Country of Publication:
- United States
- Language:
- English
Similar Records
The SLAC Comparator for the Calibration of Digital Leveling Equipment
Investigations of Digital Levels at the SLAC Vertical Comparator
Three-dimensional shape measurement and calibration for fringe projection by considering unequal height of the projector and the camera
Conference
·
Mon Nov 06 23:00:00 EST 2006
·
OSTI ID:894929
Investigations of Digital Levels at the SLAC Vertical Comparator
Technical Report
·
Mon Jan 17 23:00:00 EST 2005
·
OSTI ID:839706
Three-dimensional shape measurement and calibration for fringe projection by considering unequal height of the projector and the camera
Journal Article
·
Sun Apr 10 00:00:00 EDT 2011
· Applied Optics
·
OSTI ID:22036614