Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Hydrothermal alteration at the Roosevelt Hot Springs thermal area, Utah: Petrographic characterization of the alteration to 2 kilometers depth

Technical Report ·
DOI:https://doi.org/10.2172/893371· OSTI ID:893371
Hydrothermal alteration in drill cuttings from Thermal Power drillhole 14-2, Roosevelt Hot Springs Thermal area, has been studied petrographically. The hole is sited in alluvium approximately 1.6 km southeast of the old Resort and was rotary drilled to a depth of 1866.0 m. The exact hole location is 2310 FNL, 350 FWL, Sec. 2, Twp 27S, Rge 9W, elevation 1908.5 m. Core was extracted from 792.5 to 795.5 m. Thin sections were made from samples at 15.2 m intervals of drill cuttings collected at 1.5 or 3.0 m intervals during drilling. Thin sections were made of 1.5 or 3.0 m intervals from 274.3 to 304.8 m, 487.9 to 581.2 m, and 868.7 to 899.2 m. These intervals were chosen for close spaced sampling on the basis of increases in temperature, porosity, conductivity and acoustic velocity shown in geophysical logs. A total of 153 thin sections of cuttings were made, and an additional 9 sections were made from the core. Depths of thin section samples are listed in the appendix. A visual estimate of the percentage of each rock type was made for each thin section.
Research Organization:
University of Utah, Salt Lake City, UT
Sponsoring Organization:
USDOE
OSTI ID:
893371
Report Number(s):
UU-78-4-Z
Country of Publication:
United States
Language:
English