Coherent Instabilities of ILC Damping Ring

Conference · Wed Sep 27 04:00:00 EDT 2006

OSTI ID:892601

Heifets, S; Stupakov, G; Bane, K

The paper presents the first attempt to estimates the ILC damping ring impedance and compare thresholds of the classical instabilities for several designs initially proposed for the DR. The work was carried out in the spring of 2006. Since then the choice of the DR is narrowed. Nevertheless, the analysis described may be useful for the next iterations of the beam stability. Overall, the conventional instabilities will have little impact on the ring performance provided the careful design of the ring minimizes the impedance below acceptable level indicated above. The only exception is the transverse CB instability. The longitudinal CB is less demanding. However, even the transverse CB instability would have threshold current above nominal provided the aperture in the wigglers is increased from 8 mm to 16 mm. The microwave instability needs more studies. Nevertheless, we should remember that the ILC DR is different from existing high-current machines at least in two respects: absence of the beam-beam tune spread stabilizing beams in colliders, and unusual strict requirements for low emittance. That may cause new problems such as bunch emittance dilution due to high-frequency wakes (BPMs, grooves), etc. Even if such a possibility exists, it probably universal for all machines and ought be addressed in the design of vacuum components rather than have effect on the choice of the machine design.

• Research Organization: Stanford Linear Accelerator Center (SLAC)
• Sponsoring Organization: USDOE
• DOE Contract Number: AC02-76SF00515
• OSTI ID: 892601
• Report Number(s): SLAC-PUB-12128
• Country of Publication: United States
• Language: English

Related Subjects

43 PARTICLE ACCELERATORS
Accelerators
ACCPHY
BEAM DYNAMICS
BEAM EMITTANCE
DAMPING
DESIGN
IMPEDANCE
INSTABILITY
LINEAR COLLIDERS