Twinning in Laves Phases by Synchroshear: Atomic Mechanisms and Compositional Control. Final report, May 15, 1997 to August 31, 2001
- University of Pennsylvania
Compression tests between 4.2 and 1273 K, compositional variation and conventional transmission electron microscopy were used to investigate the deformation and twinning behavior of C15 HfV2+Nb - based Laves phase alloys. We chose two phase C15/bcc alloys to improve the ambient temperature ductility which has not been found in the single phase Laves intermetallic compound. Transmission electron microscopy revealed that substantial mechanical twinning takes place in the CI5 Laves phase matrix at room temperature and 77 K. A deep minimum in the flow stress, with a drop of nearly 500 MPa, appears at around 77 K in the C15/bcc two-phase alloy with C15 matrix. Since no such anomaly is seen in the bcc phase, we believe that the cause of this can be attributed to mechanical twinning in the CI5 Laves phase. Twin bands observed in the CI5 matrix of deformed samples at both 298 K and 77 K can be classified into three categories by their thicknesses; coarse twin bands about 10nm to several hundreds nm thick, fine twin bands around 3 to 10 nm thick, and ultra fine twin bands with average thickness of 1.5 nm. A high density of ultra-fine twin bands is the characteristic feature of twinning in the C15 matrix. They belong to the <112>(111) twinning system and commonly intersect with each other.
- Research Organization:
- University of Pennsylvania
- Sponsoring Organization:
- USDOE - Office of Energy Research (ER)
- DOE Contract Number:
- FG02-97ER45641
- OSTI ID:
- 891783
- Report Number(s):
- DOE/ER/45641-F
- Country of Publication:
- United States
- Language:
- English
Similar Records
Room-temperature deformation in a Laves phase
Deformation and defects in Laves-phase intermetallic compounds