Investigation of Cd1-XMgxTe Alloys for Tandem Solar Cell Applications: Preprint
Theoretical modeling of two-junction tandem solar cells shows that for optimal device performance, the bandgap of the top cell should be in the range of 1.6 to 1.8 eV. Cd1-xMgxTe (CMT) alloys have a lattice constant close to that of CdTe, and the addition of a small amount of Mg changes the bandgap considerably. In this paper, we present our work on developing CMT for solar cell applications. CMT films were prepared by vacuum deposition with co-evaporation of CdTe and Mg on substrates heated to 300-400 C. Films with a composition in the range of x = 0 to 0.66 were fabricated, and optical analysis of the films showed that the bandgap of the samples ranged from 1.5 to 2.3 eV and varied linearly with composition. For the fabrication of devices using these alloy films, we also investigated the effect of post-deposition CdCl2 heat treatment. We have investigated junctions between CdS and CMT alloys in the bandgap range of 1.5 to 1.8 eV for tandem cell applications. We have also worked on the ohmic contacts to the CMT alloy films using Cu/Au bilayers, and the preliminary data shows a significant effect of the contact processing on the device performance.
- Research Organization:
- National Renewable Energy Laboratory (NREL), Golden, CO.
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC36-99GO10337
- OSTI ID:
- 891547
- Report Number(s):
- NREL/CP-520-39899
- Country of Publication:
- United States
- Language:
- English
Similar Records
Investigation of Cd1-xMgxTe Alloys for Tandem Solar Cell Applications (Poster)
Development of a Wide Bandgap Cell for Thin Film Tandem Solar Cells: Final Technical Report, 6 November 2003 - 5 January 2007