Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Determination of NAPL-Water Interfacial Areas in Well-Characterized Porous Media

Journal Article · · Environmental Science and Technology
DOI:https://doi.org/10.1021/es050037p· OSTI ID:881932

The nonaqueous-phase liquid (NAPL)-water interfacial area is an important parameter which influences the rate of NAPL dissolution in porous media. The aim of this study was to generate a set of baseline data for specific interfacial area for a two-phase entrapped NAPL-water system in well-characterized porous media, and subsequently use these data to evaluate two current theoretical models. The first model tested distributes entrapped NAPL over the pore classes based on Land's algorithm and assumes the resulting blobs to be spherical. The other model is thermodynamically based, assuming that reversible work done on the system results in an increase in interfacial area, such that the area between drainage and imbibition retention curves can be related to the interfacial area. Interfacial tracer tests (IFTT) were used to measure specific entrapped NAPL (hexadecane)-water interfacial areas in columns packed with four grades (12/20, 20/30, 30/40, 40/50) of silica sand. Using the anionic surfactant dihexylsulfosuccinate (Aerosol? MA80), IFTT gave specific interfacial areas between 58 cm-1 for the finest sand and 16 cm-1 for the coarsest, compared to values of between 33 cm-1 and 7 cm-1 for the first model and between 19 cm-1 and 5 cm-1 for the thermodynamic model. Results from the literature suggest that non-spherical blobs shapes occur relatively frequently; hence it is reasonable to suggest that the assumption of spherical NAPL blobs may explain the underprediction by the first model. The thermodynamic model underestimates the interfacial area because it assumes that entrapment occurs only within the largest pores. A modified version of the latter model, allowing entrapment across all pore classes, yielded values between 58 cm-1 and 13 cm-1. Of the models tested the modified thermodynamic model best predicts the interfacial area.

Research Organization:
Pacific Northwest National Laboratory (PNNL), Richland, WA (US), Environmental Molecular Sciences Laboratory (EMSL)
Sponsoring Organization:
USDOE
DOE Contract Number:
AC05-76RL01830
OSTI ID:
881932
Report Number(s):
PNNL-SA-46772; 4599; 4599a; 830403000
Journal Information:
Environmental Science and Technology, Journal Name: Environmental Science and Technology Journal Issue: 3 Vol. 40; ISSN ESTHAG; ISSN 0013-936X
Country of Publication:
United States
Language:
English

Similar Records

Impact of Wettability on Pore-Scale Characteristics of Residual Nonaqueous Phase Liquids
Journal Article · Fri Jul 31 00:00:00 EDT 2009 · Environ. Sci. Technol. · OSTI ID:1005745

A Practical Model for Mobile, Residual, and Entrapped NAPL in Water-Wet Porous Media
Journal Article · Wed Sep 01 00:00:00 EDT 2004 · Ground Water · OSTI ID:15020911

Wettability Effects on Primary Drainage Mechanisms and NAPL Distribution: A Pore-Scale Study
Journal Article · Thu Nov 14 23:00:00 EST 2019 · Water Resources Research · OSTI ID:1599441