Optical Sensors for Post Combustion Control in Electric Arc Furnace Steelmaking (TRP 9851)
Working in collaboration with Stantec Global Technologies, Process Metrix Corporation, and The Timken Company, Sandia National Laboratories constructed and evaluated a novel, laser-based off-gas sensor at the electric arc furnace facility of Timken's Faircrest Steel Plant (Canton, Ohio). The sensor is based on a mid-infrared tunable diode laser (TDL), and measures the concentration and temperature of specific gas species present in the off-gas emanating from the EAF. The laser beam is transmitted through the gas stream at the fourth hole of the EAF, and provides a real-time, in situ measurement that can be used for process optimization. Two sets of field tests were performed in parallel with Stantec's extractive probe off-gas system, and the tests confirm the TDL sensor's operation and applicability for electric steel making. The sensor measures real-time, in situ line-of-sight carbon monoxide (CO) concentrations between 5% and 35% CO, and measures off-gas temperature in the range of 1400 to 1900 K. In order to achieve commercial-ready status, future work is required to extend the sensor for simultaneous CO and CO{sub 2} concentration measurements. In addition, long-term endurance tests including process optimization must be completed.
- Research Organization:
- American Iron and Steel Institute (US)
- Sponsoring Organization:
- USDOE Office of Industrial Technologies (OIT) (EE-20) (US)
- DOE Contract Number:
- FC36-97ID13554
- OSTI ID:
- 840948
- Resource Relation:
- Other Information: PBD: 31 Dec 2003
- Country of Publication:
- United States
- Language:
- English
Similar Records
Optimization of Post Combustion in Steelmaking (TRP 9925)
Nitrogen Control in Electric Arc Furnace Steelmaking by DRI (TRP 0009)