Increasing Safety and Reducing Environmental Damage Risk from Aging High-Level Radioactive Waste Tanks
There exists a paramount need for improved understanding the behavior of high-level nuclear waste containers and the impact on structural integrity in terms of leak tightness and mechanical stability. The current program aims to develop and verify models of crack growth in high level waste tanks under accidental overloads such as ground settlement, earthquakes and airplane crashes based on extending current fracture mechanics methods. While studies in fracture have advanced, the mechanics have not included extensive crack growth. For problems at the INEEL, Savannah River Site and Hanford there are serious limitations to current theories regarding growth of surface cracks through the thickness and the extension of through-thickness cracks. We propose to further develop and extend slip line fracture mechanics (SLFM, a ductile fracture modeling methodology) and, if need be, other ductile fracture characterizing approaches with the goal of predicting growth of surface cracks to the point o f penetration of the opposing surface. Ultimately we aim to also quantify the stress and displacement fields surrounding a growing crack front (slanted and tunneled) using generalized plane stress and fully plastic, three-dimensional finite element analyses. Finally, we will investigate the fracture processes associated with the previously observed transition of stable ductile crack growth to unstable cleavage fracture to include estimates of event probability. These objectives will build the groundwork for a reliable predictive model of fracture in the HLW storage tanks that will also be applicable to standardized spent nuclear fuel storage canisters. This predictive capability will not only reduce the potential for severe environmental damage, but will also serve to guide safe retrieval of waste. This program was initiated in November of 2001.
- Research Organization:
- Idaho National Engineering and Environmental Lab., Idaho Falls, ID; Massachusetts Institute of Technology, Cambridge, MA; Savannah River Technology Center, Aiken, SC; University of California at Davis, Davis, CA (US)
- Sponsoring Organization:
- USDOE Office of Science (SC) (US)
- OSTI ID:
- 834823
- Report Number(s):
- EMSP-81898-2003
- Country of Publication:
- United States
- Language:
- English
Similar Records
Increasing Safety and Reducing Environmental Damage Risk from Aging High-Level Radioactive Waste Tanks
Increasing Safety of Aging High-Level Radioactive Waste Storage Tanks
Crack growth and fracture of thick 5083-O plate under liquefied natural gas ship spectrum loading
Technical Report
·
Sat Jun 01 00:00:00 EDT 2002
·
OSTI ID:834822
Increasing Safety of Aging High-Level Radioactive Waste Storage Tanks
Conference
·
Thu Sep 11 00:00:00 EDT 2003
·
OSTI ID:826357
Crack growth and fracture of thick 5083-O plate under liquefied natural gas ship spectrum loading
Conference
·
Tue Dec 31 23:00:00 EST 1974
· Am. Soc. Test. Mater., Spec. Tech. Publ.; (United States)
·
OSTI ID:7154733
Related Subjects
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES
54 ENVIRONMENTAL SCIENCES
AGING
CLEAVAGE
CONTAINERS
CRACK PROPAGATION
EARTHQUAKES
FRACTURE MECHANICS
HIGH-LEVEL RADIOACTIVE WASTES
NUCLEAR FUELS
PROBABILITY
RADIOACTIVE WASTES
SAFETY
SIMULATION
SLIP
STABILITY
STORAGE
TANKS
THICKNESS
WASTES
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES
54 ENVIRONMENTAL SCIENCES
AGING
CLEAVAGE
CONTAINERS
CRACK PROPAGATION
EARTHQUAKES
FRACTURE MECHANICS
HIGH-LEVEL RADIOACTIVE WASTES
NUCLEAR FUELS
PROBABILITY
RADIOACTIVE WASTES
SAFETY
SIMULATION
SLIP
STABILITY
STORAGE
TANKS
THICKNESS
WASTES