Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

APBF-DEC NOx Adsorber/DPF Project: SUV / Pick-up Truck Platform

Conference ·
OSTI ID:828943

The objective of this project is to determine the influence of diesel fuel composition on the ability of NOX adsorber catalyst (NAC) technology, in conjunction with diesel particle filters (DPFs), to achieve stringent emissions levels with a minimal fuel economy impact. The test bed for this project was intended to be a light-duty sport utility vehicle (SUV) with a goal of achieving light-duty Tier 2-Bin 5 tail pipe emission levels (0.07 g/mi. NOX and 0.01 g/mi. PM). However, with the current US market share of light-duty diesel applications being so low, no US 2002 model year (MY) light-duty truck (LDT) or SUV platforms equipped with a diesel engine and having a gross vehicle weight rating (GVWR) less than 8500 lb exist. While the current level of diesel engine use is relatively small in the light-duty class, there exists considerable potential for the diesel engine to gain a much larger market share in the future as manufacturers of heavy light-duty trucks (HLDTs) attempt to offset the negative impact on cooperate average fuel economy (CAFE) that the recent rise in market share of the SUVs and LDTs has caused. The US EPA Tier 2 emission standards also contain regulation to prevent the migration of heavy light-duty trucks and SUV's to the medium duty class. This preventive measure requires that all medium duty trucks, SUV's and vans in the 8,500 to 10,000 lb GVWR range being used as passenger vehicles, meet light-duty Tier 2 standards. In meeting the Tier 2 emission standards, the HLDTs and medium-duty passenger vehicles (MDPVs) will face the greatest technological challenges. Because the MDPV is the closest weight class and application relative to the potential upcoming HLDTs and SUV's, a weight class compromise was made in this program to allow the examination of using a diesel engine with a NAC-DPF system on a 2002 production vehicle. The test bed for this project is a 2500 series Chevrolet Silverado equipped with a 6.6L Duramax diesel engine certified to 2002 MY Federal heavy-duty and 2002 MY California medium-duty emission standards. The stock vehicle included cooled air charge (CAC), turbocharger (TC), direct fuel injection (DFI), oxidation catalyst (OC), and exhaust gas recirculation (EGR)

Research Organization:
Southwest Research Institute; National Renewable Energy Lab., Golden, CO (US)
Sponsoring Organization:
USDOE Office of Energy Efficiency and Renewable Energy (EE) (US)
OSTI ID:
828943
Report Number(s):
CONF-200308--102
Country of Publication:
United States
Language:
English

Similar Records

Investigation of Class 2b Trucks
Technical Report · Tue Apr 02 23:00:00 EST 2002 · OSTI ID:814190

APBF-DEC NOx Adsorber/DPF Project: Light-Duty Passenger Car Platform
Conference · Sun Aug 24 00:00:00 EDT 2003 · OSTI ID:828942

Development of Diesel Exhaust Aftertreatment System for Tier II Emissions
Conference · Sat Jun 01 00:00:00 EDT 2002 · OSTI ID:833271